User manual PARKSIDE PEXS 270 A1 MANUAL 7

[. . . ] Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device. General safety advice for electrical power tools Careful handling and use of electrical power tools . The following pictograms are used in these operating instructions / on the device: Read instruction manual!Rated idle running speed Safety class II Wear hearing protection, dust protection mask, protective glasses and protective gloves. [. . . ] D) Remove any setting tools or spanners before you switch the device on. A tool or spanner left attached to a rotating part of a device can lead to injury. By doing this you will Always use an electrical power tool that is intended for the task you are undertaking. By using the right electrical power tool for the job you will work more safely and achieve a better result. B) Do not use an electrical power tool if its switch is defective. An electrical power tool that can no longer be switched on and off is dangerous and must be repaired. C) Pull the mains plug from the socket before you make any adjustments to the device, change accessories or when the device is put away. This precaution is intended to prevent you from unintentionally starting the device. D) When not in use always ensure that electrical power tools are kept out of reach of children. Do not let anyone use the device if he or she is not familiar with it or has not read the instructions and advice. Electrical power tools are dangerous when they are used by inexperienced people. Check that moving parts are working properly and move freely. Check for any parts that are broken or damaged enough to detrimentally affect the functioning of the device. Have damaged parts repaired before you use General safety advice for electrical power tools the device. Many accidents have their origins in poorly maintained electrical power tools. Carefully maintained cutting tools with sharp cutting edges are less likely to jam and are easier to control. g) Use the electrical power tool , accessories , inserted tools etc. In accordance with these instructions and advice, and the stipulations drawn up for this particular type of device. In doing this, take into account the working conditions and the task in hand. The use of electrical power tools for purposes other than those intended can lead to dangerous situations. ½ Grinding dust in the dust sack, microfilter, paper sack (or in the filter sack or filter of the vacuum cleaner) can ignite automatically under unfavour-able conditions such as flying sparks when metal is being ground. There is a par-ticular hazard if the grinding dust is mixed with paint or polyurethane residues or other chemical substances and the material being ground is hot after being worked on for a prolonged period. [. . . ] External Exhaust Suction (see Illustration A): Connection: Push the adapter for external exhaust suction 7 on to the exhaust nozzle 6 and turn it clockwise to fix it in place. If necessary, use the reducing piece 8 by pushing it into the adapter for external exhaust suction 7 . A workshop vacuum cleaner) on to the adapter for external exhaust suction 7 , using the reducing piece if necessary 8 . removal: Pull the hose of the suction device off the adapter for external exhaust suc-tion 7 . [. . . ]