User manual PARKSIDE PFLK 15

[. . . ] Under no circumstances quench the tip in water!Place the soldering pencil in the stand during any pauses in your work. To avoid the risk of fire we recommend that you place the soldering pencil down only in the special stand or on a fire-resistant support pad. Do not use the soldering pencil if the mains cable is damaged. [. . . ] When working in the open, rubber gloves and non-skid footwear is recommended. Wear a hair net if you have long hair. 5 11. Wear eye protection, protective mask and ear defenders. For work which produces splinters, swarf or dust or when working overhead always wear eye protection, with an appropriate protective mask. When working in noisy conditions, wear ear defenders. If devices for the connection of dust suction equipment and collectors are available, ensure that these are connected and properly used. Use cable only for such purposes for which it is intended. Never carry the power tool by the cable. Do not use cable to disconnect the tool from the mains supply. Protect the cable against heat, oil and sharp edges. Use a fastening device or a vice to secure the work. This guarantees a safer hold than with a single hand and allows you to operate the power tool with both hands. Get a firm stand and hold your balance at any time. Keep your tools clean and sharp to be able to perform better and safer work. Observe the service instructions and the note regarding change of tools. Check the cable of the tool regularly and in case of damage, ask for professional repair. Check extension cables regularly and replace them if damaged. Keep handles dry and free of oil and grease. When power tool is not used, before maintenance and when changing tools, such as saw blade, drill, hob. Before switching on device, ensure that the keys and adjustment tools are removed. Do not carry any tools connected to the mains supply with your finger on the switch . Ensure that the switch is off when plugging instrument into socket. Only use authorized and respectively marked extensions for use in the open. [. . . ] Type/machine description: Bochum, 31. 01. 03 PARKSIDE SOLDERING PENCIL PFLK 15 Hans Kompernaß - Managing Director - 7 Warranty This piece of equipment is covered by a 36-month warranty as of the date of purchase. The equipment was produced with the greatest of care and underwent thorough testing before delivery. In the unlikely event of detecting a functional defect, please return the equipment in its original packaging with the proof of purchase (if available) to the closest service address. Damage caused due to improper handling as well as regular wear of the parts are not covered by this warranty. [. . . ]