User manual PARKSIDE PGG 15 A1 POWER ENGRAVING TOOL

[. . . ] Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device. General safety advice for electrical power tools Careful handling and use of electrical power tools . The following pictograms are used in these operating instructions / on the device: Read instruction manual!Keep children away from electrical power tools! [. . . ] Accidents can happen if you carry the device with your finger on the ON / OFF switch or with the device switched on. D) Remove any setting tools or spanners before you switch the device on. A tool or spanner left attached to a rotating part of a device can lead to injury. General safety advice for electrical power tools This you will be in a better position to control the device in unforeseen circumstances. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves clear of moving parts. Loose clothing, jewellery or long hair can become trapped in moving parts. G) If vacuum dust extraction and collection devices are fitted do not forget to check that they are properly connected and correctly used. The use of these devices reduces the hazard presented by dust. Careful handling and use of electrical power tools a) Do not overload the device. Always use an electrical power tool that is intended for the task you are undertaking. By using the right electrical power tool for the job you will work more safely and achieve a better result. B) Do not use an electrical power tool if its switch is defective. An electrical power tool that can no longer be switched on and off is dangerous and must be repaired. C) Pull the mains plug from the socket before you make any adjustments to the device, change accessories or when the device is put away. This precaution is intended to prevent you from unintentionally starting the device. D) When not in use always ensure that electrical power tools are kept out of reach of children. Do not let anyone use the device if he or she is not familiar with it or has not read the instructions and advice. Electrical power tools are dangerous when they are used by inexperienced people. General safety advice for electrical power tools / Operation e) Look after the device carefully. [. . . ] It could damage these materials and render them illegible. Before performing any cleaning or maintenance work, always remove the mains plug from the socket. Clean all the dirt off the drill / grinder. Have your device repaired at the service centre or by qualified specialist personnel using original manufacturer parts only. [. . . ]