User manual PARKSIDE PLP 100

[. . . ] Please read the operating instructions below. Be careful to keep these advice notes and if necessary pass them on to a third party. © Proper use The device is intended for soldering tasks in a DIY environment. Soft soldering takes place at temperatures below 450 C°. Suitable solders have typical melting temperatures around 200 C°. [. . . ] One moment of carelessness when using the device can lead to serious injury. ½ Never touch the hot soldering tip or the molten solder. Always let the device cool before you replace components on the device, clean it or check its condition. ½ After use let the soldering gun cool down in air only. Under no circumstances quench the tip in water!½ When allowing the device to cool or when taking a break from using it, always stand the device up vertically with the soldering tip at the top. ½ Keep the device away from combustible materials. Keep your hands away from the hot workpiece. Avoid contact with the hot soldering tip. ½ If a dangerous situation arises, pull the mains plug immediately out of the mains socket. Do not breathe air contaminated with soldering fumes. ½ When working with the device for long periods do not allow the fumes from soldering to build up. Always provide adequate GB/IE/CY 11 Safety advice ventilation of your working area. In addition, it is recommended that you wear protective gloves, a face mask and a protective apron. ½ Do not eat, drink or smoke in rooms where soldering is carried out. Otherwise your hands may transfer any adhering traces of lead via food or cigarettes into your body. ½ Always wash your hands immediately after soldering . ½ Do not dispose of soldering waste with the household rubbish. Soldering waste must disposed of as special waste. 4. Careful handling and use of electrical power tools a) When not in use always ensure that electrical power tools are kept out of reach of children. Do not let anyone use the device if he or she is not familiar with it or has not read the instructions and advice. Electrical power tools are dangerous when they are used by inexperienced people. Check for broken parts or parts that are damaged to the extent they detrimentally affect the functioning of the device. [. . . ] The warranty is void in the case of abusive and improper handling, use of force and internal tampering not carried out by our authorized service branch. Your statutory rights are not restricted in any way by this warranty. The warranty period will not be extended by repairs made unter warranty. This applies also to replaced and repaired parts. [. . . ]