User manual PARKSIDE PLP 180

[. . . ] Before every use check that the soldering gun is in proper operating condition; does the power supply match the requirements, is the solder about to run out or is it broken?The size of the soldering tip must be suitable for the size of the soldered joint. The soldering tip must be free of contaminants. A small wet sponge is ideal for cleaning it Make sure that the joint surfaces to be soldered are bright, clean metal. [. . . ] Do not use power tools in a moist or wet environment. Do not use power tools close to inflammable liquids or gases. Protect yourself against an electric shock. Avoid physical contact with earthed parts such as tubes, radiators, stoves, refrigerators. Keep other people away from your working area. Tools not being used should be stored in a dry, high and closed place, out of the reach of children. Your work is safer and better if carried out within the indicated capacity ranges. Do not use machines of insufficient capacity for heavy-duty work. Do not use tools for other purposes than those for which they are intended, for example do not use a manual circular saw for cutting tree trunks and timber. Do not wear wide clothes or jewellery since they might be caught by mobile parts. When working in the open, rubber gloves and non-skid footwear is recommended. Wear eye protection, protective mask and ear defenders. For work which produces splinters, swarf or dust or when working overhead always wear eye protection, with an appropriate protective mask. When working in noisy conditions, wear ear defenders. If devices for the connection of dust suction equipment and collectors are available, ensure that these are connected and properly used. Use cable only for such purposes for which it is intended. Never carry the power tool by the cable. Do not use cable to disconnect the tool from the mains supply. Protect the cable against heat, oil and sharp edges. Use a fastening device or a vice to secure the work. This guarantees a safer hold than with a single hand and allows you to operate the power tool with both hands. Get a firm stand and hold your balance at any time. [. . . ] Repair work may only be carried out by a professional electrician by using original spare parts; otherwise this may entail in accidents for the operator. 6 www. kompernass. com +++ www. kompernass. com +++ www. kompernass. com +++ WARRANTY This piece of equipment is covered by a 36-month warranty as of the date of purchase. The equipment was produced with the greatest of care and underwent thorough testing before delivery. In the unlikely event of detecting a functional defect, please return the equipment in its original packaging with the proof of purchase (if available) to the closest service address. Damage caused due to improper handling as well as regular wear of the parts are not covered by this warranty. Beaver Electronic Services · The Lodge, Premier Business Park Long Street, Walsall · West Midlands, WS2 9DY Tel. : 0 19 22/72 55 54 · Fax: 0 19 22/72 54 17 WARRANTY This piece of equipment is covered by a 36-month warranty as of the date of purchase. [. . . ]