User manual PARKSIDE PMS 130

[. . . ] The manufacturer will not accept liability for loss or damage arising from improper use. Power input: Nominal sanding speed: Sound pressure level: Sound power level: Hand/arm vibration: 130 watts no 11, 000 rpm (no load) dB (A) dB (A) < m/s2 If the mains lead becomes damaged or severed, do not touch the mains lead. Pull out the mains plug from the socket immediately. A damaged mains lead may result in loss of life by electric shock. [. . . ] Lead poisoning of children and expectant mothers is particularly dangerous. Paint in buildings that were built before 1960 may well contain lead. These paints may have been covered with additional layers of paint. Therefore you should always test the paint on the surface to be sanded using a suitable testing kit or ask the advice of a decorator. Keep children and expectant mothers away from where you are working. Wear a special mask to protect yourself from dust and vapours arising from paint containing lead. Make sure that anyone else near where you are working wears appropriate protection. Do not keep any foodstuffs or drinks near where you are working. Do not eat, drink or smoke near where you are working. After finishing work be sure to wash thoroughly before eating, drinking or smoking. Advice on the use of sand paper Coarse sand paper: Medium sand paper: Fine sand paper: is recommended for the quick removal of paint, varnish and rust. Before starting any work on the palm detail sander, make sure that the tool is switched off and the mains plug is out of the socket. Fit the sanding sheet exactly over the backing plate. Make sure that the holes in the sanding sheet coincide with the holes in the backing plate. When the sanding sheet becomes worn, simply remove it from the backing plate and fit a new one as described above. Before starting any work on the palm detail sander, make sure that the tool is switched off and the mains plug is out of the socket. the palm detail sander is supplied with a dust extraction adapter. When sanding wood a suitable suction device designed for that purpose should be attached to the dust extraction adapter . Tools marked with 230 V can also be operated at 220 V. When using the tool, never allow the ventilation slots to be covered. The palm detail sander PMS 130 has a backing plate that can rotate through 360 degrees. This allows you to maintain the best grip on the tool even when working on difficult to access areas. [. . . ] 21, D-44867 Bochum, Germany, declare that this product complies with the following EU directives: Machinery Directive: (98/37 EC) EU Low Voltage Directive: (73/23/EEC) Electromagnetic compatibility: (89/336/EEC) Device type/Model: Palm detail sander PMS 130 We reserve the right to make technical modifications in the course of further development. This piece of equipment is covered by a 3-year warranty as of the date of purchase. The equipment was produced with the greatest of care and underwent thorough testing before delivery. In the unlikely event of detecting a functional defect, please return the equipment in its original packaging with the proof of purchase to the closest service address. [. . . ]