User manual PARKSIDE POF 1300

[. . . ] ROUTER Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device. POF 1300 ROUTER Kompernaß GmbH Burgstraße 21 D-44867 Bochum (Germany) GB / IE / CY Operation and Safety Notes Page 5 Operation and Safety Notes Last Information Update: 10 / 2007 · Ident. -No. : POF 1300102007-6 A 14 13 C 1 D 12 11 10 9 2 3 4 29 28 27 26 32 31 30 8 7 5 6 E 33 34 35 36 F B 24 25 15 37 23 16 17 G H 18 19 22 21 20 Table of content Introduction Proper use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page Features and equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page Included items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page Technical information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Hold the device only by the insulated handle if there is the risk that you might cut through a J J J J J J Safety advice relating specifically to this device J J Securely support the workpiece. Use clamps or a vice to grip the workpiece firmly. This is much safer than holding it in your hand. For this reason, always make sure that nobody is placed in any danger and that there are no inflammable materials near the working area. Be aware that persons operating the tool or in its vicinity may be at risk of being in contact with or inhaling dusts. Take all the necessary safety precautions in relation to dusts. Working with this tool can give rise to dusts that may be hazardous to health, inflammable or explosive. Harmful or poisonous dusts can, for example, arise from machining paints containing lead, or from certain types of hardwoods or metals. Wear a breathing mask and use a suitable dust / chip vacuum extraction device. Mixtures of materials can be particularly dangerous. Light metal dust, for example, may burn or explode. Danger of electric shock from metal dust!Machining metal can result in electrically conductive dust being deposited inside the device. In these circumstances the inside of the motor compartment must be blown out at frequent intervals with compressed air, vacuum extraction GB/IE/CY J J J J J J J J J J J J J J 10 Safety advice / Preparing for use concealed cable or the device's mains lead. Contact with an electrical lead or cable means that the metal parts of the device may also become live and this can result in electric shock. Always keep the device clean, dry and free of oil or grease. Dirty devices increase the risk of injury (e. g. You will work better and more safely with clean cutting tools. Q Preparing for use Router bit set / scope of application Q J Q Original accessories / attachments Use only the accessories and attachments detailed in the operating instructions. The use of inserted tools or accessories other than those recommended in the operating instructions could lead to you suffering an injury. J Router bits (also referred to as router cutters) are available in a wide range of qualities and designs to suit the type of cutting and intended application. The following descriptions give you an indicative overview (without liability) of the scope of application of different router bits. The included router bit set contains router cutters for the most common routing tasks. Q Caution utility services! Danger!Ensure that you do not strike electrical cables, gas or water pipes when you are working with an electrical power tool. [. . . ] Pull the mains lead out of the mains socket before you clean the device, otherwise there may be risk of injury . j Always keep the device and the ventilation slots clean, dry and free of oil or grease. Dirty devices increase the risk of injury (e. g. You will work better and more safely with clean cutting tools. [. . . ]