User manual PARKSIDE PSB 1050 A1

[. . . ] Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device. General safety advice for electrical power tools Careful handling and use of electrical power tools . The following pictograms are used in these operating instructions / on the device: Read instruction manual!Quick - release chuck Spindle lock Drilling Impact drilling Wear hearing protection, dust protection mask, protective gloves and protective glasses. [. . . ] B) Do not use an electrical power tool if its switch is defective. An electrical power tool that can no longer be switched on and off is dangerous and must be repaired. C) Pull the mains plug from the socket before you make any adjustments to the device, change accessories or when the device is put away. This precaution is intended to prevent you from unintentionally starting the device. D) When not in use always ensure that electrical power tools are kept out of reach of children. Do not let anyone use the device if he or she is not familiar with it or has not read the instructions and advice. Electrical power tools are dangerous when they are used by inexperienced people. Check that moving parts are working properly and move freely. Check for any parts that are broken or damaged enough to detrimentally affect the functioning of the device. Have damaged parts repaired before you use the device. Many accidents have their origins in poorly maintained electrical power tools. Carefully maintained cutting tools with sharp cutting edges are less likely to jam and are easier to control. g) Use the electrical power tool , accessories , inserted tools etc. In accordance with these instructions and advice, and the stipulations drawn up for this particular type of device. In doing this, take into account the working conditions and the task in hand. The use of electrical power tools for purposes other than those intended can lead to dangerous situations. Wear ear protection when percussion drilling. Exposure to noise can cause hearing loss. If a dangerous situation arises, pull the mains plug immediately out of the mains socket. Always work with the mains lead leading away from the rear of the device. Always make sure that nobody is placed in any danger and that there are no inflammable materials near the working area. Working with harmful / poisonous dusts presents a danger to health for the tool operator and any persons in the vicinity. [. . . ] Tighten the wing screw 9 by turning it clockwise. You should preferably use a workshop vacuum cleaner for dust extraction purposes. connect the tube of the dust extraction device with the angle adapter 12 ; see also Figure F. This will ensure that your device remains safe to use. [. . . ]