User manual PARKSIDE PSS 310

[. . . ] Please read the operating instructions below and the accompanying safety advice !Use the equipment only as described and for the indicated purposes. By doing this you will be able to work in complete safety and produce better results. We hope you enjoy using your sander. PROPER USE The orbital sander is intended for sanding wood, metal and paint. [. . . ] Ensure that the adapter fits correctly into the holder. Clip the dust bag with the adapter to the side of the sander. · DUST EXTRACTION WITH VACUUM CLEANER For dust extraction using a vacuum cleaner use the appropriate connector ­ see Figure . Attach the adapter to the end of the vacuum cleaner hose and clip it to the side of the equipment. MAINTENANCE OF THE ORBITAL SANDER 1. For the best results do this straight after the work has been completed. Do not allow liquids to get inside the sander. Use a soft cloth for cleaning the housing. Do not use petrol, solvents or cleaners that may attack the plastic. Air vents must always be clear and clean. 5 4 manual GB (+IRL)_Helv 17. 06. 2003 14:21 Uhr Seite 6 www. kompernass. com +++ www. kompernass. com +++ www. kompernass. com +++ w ADVICE ON WORKING METHODS, TIPS AND TRICKS · · · · · · · · ·* ·* You can use the PSS 310 orbital sander for effortless sanding even on large areas, see Fig. Move the orbital sander in parallel broad circles or in alternate longitudinal and transverse directions. This damages the sanding sheets and adversely affects sanding performance. From time to time clean the sanding sheet with a vacuum cleaner. You do not have to resand any areas when working up to edges. The orbital sander works right into the corners because its housing is continuous with the edge of the sanding sheet, see Fig. The integrated dust extraction system allows you to work cleanly overhead. Use the integrated dust extraction system or your vacuum cleaner wherever possible when sanding. The choice of speed and grade of sanding sheet determines the sanding performance and therefore the results of your work. Never use the same sanding sheet on different materials (e. g. For metals we recommend 60 grade (steel) or 80 grade (aluminium) ­ with a medium to high speed. For wood we recommend 60 grade (hardwood) or 60 ­ 80 grade (soft wood) with a medium to high speed. [. . . ] Damage caused due to improper handling as well as regular wear of the parts are not covered by this warranty. Beaver Electronic Services · The Lodge, Premier Business Park Long Street, Walsall · West Midlands, WS2 9DY Tel. : 08707876177 · Fax: 01922/725417 WARRANTY This piece of equipment is covered by a 3-year warranty as of the date of purchase. The equipment was produced with the greatest of care and underwent thorough testing before delivery. In the unlikely event of detecting a functional defect, please return the equipment in its original packaging with the proof of purchase to the closest service address. [. . . ]