User manual PARKSIDE X 14.4-LI

[. . . ] Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device. General safety advice for electrical power tools Careful handling and use of electrical power tools . Careful handling and use of rechargeable devices . The following icons / symbols are used in this instruction manual: Read instruction manual! [. . . ] In doing this, take into account the working conditions and the task in hand. The use of electrical power tools for purposes other than those intended can lead to dangerous situations. Areful handling and use of C electrical power tools a) o not overload the device. Always D use an electrical power tool that is intended for the task you are undertaking. By using the right electrical power tool for the job you will work more safely and achieve a better result. B) o not use an electrical power tool if D its switch is defective. An electrical power tool that can no longer be switched on and off is dangerous and must be repaired. C) ull the mains plug out of the socket P before you make any adjustments to the device, change accessories or when the device is put away. This precaution is intended to prevent you from unintentionally starting the device. D) hen not in use always ensure that W electrical power tools are kept out of reach of children. Do not let anyone use the device if he or she is not familiar with it or has not read the instructions and advice. Electrical power tools are dangerous when they are used by inexperienced people. Check L that moving parts are working properly and move freely. Check for any parts that are broken or damaged enough to detrimentally affect the functioning of the device. Have damaged parts repaired before you use the device. Many accidents have their origins in poorly maintained electrical power tools. Carefully maintained cutting tools with sharp cutting edges are less likely to jam and are easier to control. Careful handling and use of rechargeable devices A) Charge a rechargeable battery unit using only the charger recommended by the manufacturer. chargers are often designed for a particular type of rechargeable battery unit. There is the danger of fire if other types of rechargeable battery units are used. B) Only the rechargeable battery units supplied are to be used with an electrical power tool. The use of other rechargeable battery units may lead to the danger of injury or fire. [. . . ] The spindle lock releases itself automatically when the motor is started (by operation of the On / Off switch 4 ). J Select a low setting for small screws, soft work j Select a high setting for large screws, hard J for drilling tasks, also push the gear selector switch 1 to the front (Position: 2). Failure to observe this advice may result in damage to the device. In the first gear (Gear selector switch 1 in Position: 1) A speed of up to approx. [. . . ]