User manual PARKSIDE XQ600

[. . . ] Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device. Careful handling and use of electrical power tools . Page 11 Advice about ways of working when sanding. The following icons / symbols are used in this instruction manual: Read instruction manual! [. . . ] Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves clear of moving parts. Loose clothing, jewellery or long hair can become trapped in moving parts. G) If vacuum dust extraction and collection devices are fitted do not forget to check that they are properly connected and correctly used. The use of these devices reduces the hazard presented by dust. A) Remain alert at all times, watch what you are doing and always proceed with caution. Do not use the device if you are tired or under the influence of drugs, alcohol or medication. One moment of carelessness when using the device can lead to serious injury. B) Wear personal protective equipment and always wear safety glasses. The wearing of personal protective equipment such as dust masks, non-slip safety shoes, safety helmets or ear protectors, appropriate to the type of electrical power tool used and work undertaken, reduces the risk of injury. Careful handling and use of electrical power tools a) Do not overload the device. Always use an electrical power tool that is intended for the task you are undertaking. By using the right electrical power tool for the job you will work more safely and achieve a better result. B) Do not use an electrical power tool if its switch is defective. An electrical power tool that can no longer be switched on and off is dangerous and must be repaired. C) When not in use always ensure that electrical power tools are kept out of reach of children. Do not let anyone use the device if he or she is not familiar with it or has not read the instructions and advice. Electrical power tools are dangerous when they are used by inexperienced people. Check that moving parts are working properly and move freely. Check for any parts that are broken or damaged enough to detrimentally affect the functioning of the device. Have damaged parts repaired before you use the device. Many accidents have their origins in poorly maintained electrical power tools. [. . . ] General safety advice / Before use / Commissioning You may begin to work with the appliance when you have familiarised yourself with the instructions, functions and handling of the appliance. Material / Working range Rough finish (Gritting) Fine finish (Gritting) Rotation speed preselection Material / Working range Rough finish (Gritting) Fine finish (Gritting) Rotation speed preselection Material / Working range Rough finish (Gritting) Fine finish (Gritting) Rotation speed preselection Material / Working range Rough finish (Gritting) Fine finish (Gritting) Rotation speed preselection Before carrying out work on the appliance, always remove the plug from the power socket. The rotary sander is fitted with a velcro rapid attachment, making possible a quick and easy exchange of sanding sheets. Note: Before securing a new sanding sheet 9 , remove all dust and dirt from the sander plate 8 . [. . . ]