User manual PARROT DF7220

[. . . ] If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Of 174 quai de Jemmapes, 75010 Paris, France, declare under our sole responsibility that our Product, the Parrot DF7220 to which this declaration relates is in conformity with appropriate standards EN300328, EN301489-1, EN60950 following the provision of Radio Equipment and Telecommunication Equipment directive (1999/5/EC R&TTE), with requirements covering EMC directive 89/336/EEC. [. . . ] This product is also designed for IT power distribution system with phase-to-phase voltage 230V. It allows several electronic devices to communicate with each other. Parrot draws on its long years of experience in the Bluetooth technology to offer you the Parrot DF7220, an innovative photo frame. You can send your photos to the Parrot DF7220 via Bluetooth, USB connection or an SD card. The Parrot DF7220 is an LCD photo frame (410 x 234 pixels) with a stylish design that can store over 300 photos. A clip system (for fixing the power cable along the side of the frame) (2) · Screw the metal rod into the back of the frame. Connect the power cable connector to the transformer and plug it into an electrical socket. Choose the language to be used by the Parrot DF7220 (refer to the section entitled «Description of the Icons and Features» in the «Settings» chapter) You can scroll through the menus using the buttons on the back of the Parrot DF7220. It can also be used to select the previous photo. It can also be used to select the next photo. : Organises the order in which the photos are displayed. : Lets you switch from the internal memory to the SD card. : Provides information on the software built into the Parrot DF7220, the memory status and the picture displayed. Parrot DF7220, the memory status and the picture displayed. The «Settings» menu can be accessed from the main menu. : Copies the pictures on the SD card to the internal memory. : Lets you switch from the SD card to the internal memory. (AM/PM) : - Visibility: makes the Parrot DF7220 visible or invisible to other Bluetooth devices. - Frame name: for selecting the pre-recorded Bluetooth name by which the frame will be detected by other Bluetooth devices. - Advanced mode: for selecting a specific or standard pairing mode depending on the model of your Bluetooth phone (for further information, visit the Support heading on our website at www. Depending on the model of your phone / computer you may have to pair your Parrot DF7220 with your device before sending pictures on it for the very first time. This procedure allows both devices to exchange information in order to configure a Bluetooth connection. [. . . ] Select the picture with the «Select» buttons and then press the «Enter» button on the back of the frame to confirm your choice. You can change its position in all the pages of your album. ⷠOnce the cursor is in the position where you want to place 1 The Parrot DF7220 features five slideshows: a default slideshow with all the photos in the internal memory, three user-definable customised slideshows and an SD card slideshow. Once the slideshow has been selected, you can enable / disable or configure it. [. . . ]