User manual PARROT DS3120

[. . . ] User Guide Parrot DS3120 English 1 Table of contents Using the Parrot DS3120 for the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Setting up the Parrot DS3120. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Changing the language of the Parrot DS3120 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] In the main menu, select Settings > Display > Idle delay. · · 2. Select a period of time and press . * The idle mode does not prevent the alarm triggering. 7 Using the FM Radio function Unrolling the antenna To enjoy the best reception quality possible, use the antenna located in the batteries compartment. Open the lid of the batteries compartment. Remove the 4 plastic parts located on the 4 corners of the compartment. Unroll the antenna and get it out making sure it is located on the slot as indicated on the diagram below. Close the lid of the batteries compartment. 3. 4. Saving preset stations 1. From the main menu, select Radio > FM Radio. > Briefly press the buttons to change manually the radio frequency. > Hold the buttons to perform a quick tuning. Once you selected a frequency, press the button during 2 seconds. > Then, you can : · Select the Append to presets option to add this frequency to the already saved ones. · Select an already saved frequency if you want to erase it. 2. You can save up to 20 frequencies. 8 Listening to a saved frequency 1. From the main menu, select Radio > Presets. > The list of the saved frequencies is displayed. Select the frequency you want to listen to and press . 2. 9 Using the Audio Streaming function Before using the Audio Streaming function, you must first connect your audio player to the Parrot DS3120. If you are using this device with the Parrot DS3120 for the 1st time, you will have to pair both devices. Refer to the «Connecting a Bluetooth device with the Parrot DS3120 » section for further information. Using an audio player with the Parrot DS3120 via USB connection The Parrot DS3120 enables you to play music files stored on standard types of MP3 players but also on mass storage peripherals (USB flash drive, external hard disk). Make sure the external hard disk used with the Parrot DS3120 consumes less than 500 mA. 1. Connect the audio player to the Parrot DS3120. > The peripheral content is automatically displayed. > To reach the peripheral content from the main menu, select USB/SD and your audio player. 2. To visualize your audio player / USB flash drive content: · If the tags of your music files are correctly defined, select one of the following options: Playlist, Artist, Album, Songs, and Genres. If the tags of your music files are not defined, select Browse by directory, then: - Use the arrows to browse the content of your audio player. Press to enter a music folder or to start playing a music file. Press to reach the previous folder (or select « Root »). · 10 Playing music files stored on an SD card 1. Insert the SD card into the appropriate slot. > The content of the SD card is automatically displayed. Depending on the content of your peripheral, the display of its content can take up to 30 seconds. > To reach later the peripheral content from the main menu, select USB/SD, then select the peripheral you want to browse. Refer to the technical specifications for further information about the compatible SD cards. 2. To visualize the content of your SD card: · If the tags of your music files are correctly defined, select one of the following options: Playlist, Artist, Album, Songs and Genres. [. . . ] From the main menu, select Settings > Display > Time in title to visualize the time on the screen of the Parrot DS3120. 19 Setting an alarm The Parrot DS3120 allows you to set a simple and a recurring alarm. A reminder pops up if the alarm triggers while you are already using the Parrot DS3120. 1. From the main menu, select Alarm / Clock > Alarms > Alarme or Recurring alarm depending on the alarm you want to activate. Select the Enabled option to activate the alarm. 3. 4. Select the type of melody among the following possibilities: · · For a ringtone, select Buzzer. For an audio file stored on an SD card or on an USB peripheral (already connected), select File and select the audio file or the Random File option. If the audio files are stored on an MP3 player, the audio player must be turned on to enable the playback of the selected audio file as alarm. [. . . ]