Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual PARTNER PWT420. We hope that this PARTNER PWT420 user guide will be useful to you.
Lastmanuals help download the user guide PARTNER PWT420.
Detailed instructions for use are in the User's Guide.
[. . . ] Please read these instructions carefully and make sure you understand them before using this machine. Read, understand, and follow all instructions on the machine and in the manual before starting. Be thoroughly familiar with the controls and the proper use of the machine before starting. â· Do not put hands or feet near or under rotating parts. [. . . ] â· Holding the trimmer head control bar all the way down to the handle controls trimmer head rotation. â· Releasing the trimmer head control bar will stop trimmer head rotation. CAUTION: Stop the engine and wait for all moving parts to stop. Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug. The height of cut can be set to six (6) different positions ranging from 1-1/2 to 3 inches (38 to 76mm). To adjust trimming height, push in the locking plate tab and move trimmer head up or down to desired position. Release tab and be sure head is locked into one of the six (6) height positions. Read the engine manual packed with your unit. Your grass trimmer is shipped without oil in the engine. engine holds 18 ounces (0 , 5 L) of oil. For type and grade of oil to use, see the engine maintenance section in your engine manual. Be sure trimmer is level and area around oil fill is clean. Remove engine oil cap and fill to the full line on the dipstick. NOTE: Allow oil to settle down into engine for accurate dipstick reading. To read proper level, tighten engine oil cap, then remove it to read the dipstick. â· Change the oil after every 25 hours of operation or each season. You may need to change the oil more often under dusty, dirty conditions. Use fresh, clean, regular unleaded petrol with a minimum of 87 octane. Purchase fuel in quantities that can be used within 30 days to assure fuel freshness. To start a cold engine, push primer three (3) times before trying to start. This step is not usually necessary when starting an engine which has already run for a few minutes. To stop engine, move throttle trigger all the way back to to STOP position. [. . . ] Rock trimmer back and forth to remove any oil trapped inside of engine. Wipe off any spilled oil on trimmer and on side of engine. Fill engine with oil (See "ADD OIL" in the Operation section of this manual). Your engine will not run properly and may be damaged by using a dirty air filter. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE PARTNER PWT420
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual PARTNER PWT420 will begin.
