User manual PEAVEY CLASSIC

[. . . ] exit/51mm voice coil RXTM22 compression driver on a CD horn Enclosure materials and finish: 3/4" novaply finished in black carpet Mounting provisions: This unit is not designed for overhead suspension. SA-1 stand mount adaptor built-in, and four large rubber feet on bottom for floor use. Description The latest version of the SP 5 has the new RX 22 high frequency compression driver incorporated, as well as a very nice looking cabinet design. The CLASSIC is a two-way speaker system comprised of a 15" Scorpion Plus woofer with a Kevlar® impregnated cone, and an RX 22 compression driver loaded onto a CH®3 constant directivity horn. Box tuning frequency: Low Frequency Section: 51 Hz Dimensions (H x W x D): Front: 28. 00 in. [. . . ] 711 mm x 481 mm x 465 mm Rear: 28. 00 in. 711 mm x 330 mm x 465 mm Crossover frequency (internal passive): Low Frequency - High Frequency: 1, 800 Hz The SPTM 5X has a trapezoidal shaped enclosure, which reduces the build-up of standing waves inside the enclosure, which minimizes mid-bass and mid-range colorations due to the cabinet. It is constructed of 1/4" high density particle board and is covered with a durable black carpet. The enclosure corners are reinforced with polymer caps, and a black powder-coated expanded metal grille covers the lower half of the system to protect the woofer from external damage. An SA-1 stand mount adaptor is built-in for ease of speaker stand use. The two-way system is comprised of a 15" Scorpion® Plus woofer with a Kevlar® impregnated cone and a highly linear suspension. The high frequencies are handled by an RXTM22 two-inch titanium diaphragm compression driver utilizing ferrofluid cooling, coupled to a CH®3 constant directivity horn. The nominal impedance shall be 8. 0 Ohms. The maximum continuous power handling shall be 350 Watts, maximum program power of 700 Watts and a peak power input of at least 1, 400 Watts, with a minimum amplifier headroom of 3 dB. The nominal radiation geometry shall be 90 degrees in the horizontal plane and 45 degrees in the vertical plane. The outside dimensions shall be 28. 00 inches high by 18. 94 inches wide by 18. 31 inches deep. The loudspeaker system shall be a Peavey model CLASSIC. Power handling There are many different approaches to power handling ratings. Peavey rates this loudspeaker system's power handling using a full-range form of the AES Standard 2-1984. Using audio band 20 Hz to 20 kHz pink noise with peaks of four times the RMS level, this strenuous test signal assures the user that every portion of this system can withstand today's high technology music. [. . . ] Peavey rates this loudspeaker system's power handling using a full-range form of the AES Standard 2-1984. Using audio band 20 Hz to 20 kHz pink noise with peaks of four times the RMS level, this strenuous test signal assures the user that every portion of this system can withstand today's high technology music. This rating is contingent upon having a minimum of 3 dB of amplifier headroom available. 3 + 2 YEAR LIMITED WARRANTY NOTE: For details, refer to the warranty statement. [. . . ]