User manual PEAVEY CROPPER CLASSIC

[. . . ] The low frequencies are provided by the 15" Black WidowBWX woofer with a Kevlar®/carbon fiber-impregnated cone and dust cap. Capable of over 500 Watts of continuous power handling (AES Std 2-1984), the woofer can handle a lot of power, which results in very low power compression. The high frequencies are handled by a 2" RxTM22 titanium diaphragm compression driver utilizing ferrofluid cooling. [. . . ] This superb driver is coupled to a constant directivity horn with smooth, even response and good high frequency dispersion. The Rx 22 driver features the Radialinear Planar Phase Correction System (U. S. Patent 6, 064, 745), which provides smoother and extended high frequency response. Input connection to the system is made via two 1/4" phone jacks and a four-pin Neutrik® in parallel. The internal passive crossover features the Sound GuardTM III tweeter protection circuit and an advanced topology crossover with high performance components to provide high power handling and reliability. Sound Guard, Peavey's proprietary high frequency driver protection circuitry, provides long- and medium-term driver overload protection when the system is used full range without impairing musical transients or SPTM 15M Harmonic Distortion Second and third harmonic distortions vs. frequency are plotted in figures 3 & 4 for two power levels, ten percent (10%) of rated input power and either one percent (1%) of rated input power or 1 Watt, whichever is greater. Copies of this statement may be obtained by contacting Peavey Electronics Corporation, P. O. Box 2898, Meridian, Mississippi 39301-2898. dynamics. The crossover provides driver roll off and protection as well as driver EQ for the woofer and horn for clean, clear, smooth response. High quality, reliable crossover components include polypropylene capacitors and high current inductors. The optimal integration of the crossover with the selected drivers results in a smooth frequency response from 90 Hz to 14 kHz, making it highly appropriate for monitor applications. Despite its compact dimensions, this system can put out some very high sound levels and handle 1000 Watts of undistorted amplifier power program, resulting in clean monitoring with high articulation and reliability. Frequency Response This measurement is useful in determining how accurately a given unit reproduces an input signal. [. . . ] Frequency Response This measurement is useful in determining how accurately a given unit reproduces an input signal. The frequency response of the SP15M is measured at a distance of 1 meter using a 1 Watt (into the nominal impedance) swept-sine input signal. As shown in figure 1, the selected drivers in the CROPPER CLASSIC combine to give a smooth frequency response from 90 Hz to 14 kHz. [. . . ]