User manual PEAVEY DESTINY CUSTOM

[. . . ] The SSE 10M is rated at 400 Watts program and 800 Watts peak. This lightweight speaker system may be placed on stage at angles of either 30° or 45° and is ideal for smaller venues where stage space is at a premium. [. . . ] This lightweight speaker system may be placed on stage at angles of either 30° or 45° and is ideal for smaller venues where stage space is at a premium. Connections are made using a four-pin Neutrik® Speakon® or a paralleled two-position terminal block for additional cabinets. The SSE 10M is available in black, white and natural finishes. Features · Two-way monitor enclosure · Peavey 14XTTM titanium compression driver · Sound GuardTM IV tweeter protection network · 400 Watts program/800 Watts peak power handling · 12 mm birch plywood construction · 80 Hz to 17 kHz · 95 dB at 1W/1m · 8 Ohms · Available in three finishes: black, white or natural Frequency response, 1 meter on-axis, swept-sine in anechoic environment: 80 Hz to 17 kHz (±3 dB) Usable low frequency limit (-10 dB point): 60 Hz Power handling: Full Range: 400 Watts program 800 Watts peak Sound pressure level, 1 Watt, 1 meter in anechoic environment: Full range: 95 dB SPL (2. 83 V input) Maximum sound pressure level (1 meter): Full range: 118 dB SPL continuous 124 dB SPL peak Transducer complement: Low frequency section: Premium grade 10" woofer High frequency section: Peavey 14XTTM titanium diaphragm compression driver on a 90° x 60° constant directivity horn Power handling There are many different approaches to power handling ratings. Peavey rates this loudspeaker system's power handling using a full-range form of the AES Standard 21984. Using audio band 20 Hz to 20 kHz pink noise with peaks of four times the RMS level, this strenuous test signal assures the user that every portion of this system can withstand today's high technology music. This rating is contingent upon having a minimum of 3 dB available amplifier headroom. Box tuning frequency: Low Frequency Section: 78 Hz Harmonic distortion: 1% rated power Second harmonic: 100 Hz: 0. 43% 1 kHz: 0. 07% Third harmonic: 100 Hz: 0. 58% 1 kHz: 1. 02% 10% rated power Second harmonic: 100 Hz: 2. 28% 1 kHz: 0. 40% Third harmonic: 100 Hz: 0. 97% 1 kHz: 2. 02% Harmonic distortion Second and third harmonic distortions vs. 3 + 2 YEAR LIMITED WARRANTY NOTE: For details, refer to the warranty statement. Copies of this statement may be obtained by contacting Peavey Electronics Corporation, P. O. Box 2898, Meridian, Mississippi 39301-2898. or 1 watt) Impedance (Z): Full range: Nominal: 8 Minimum: 5. 4 Input connection: One four-pin Neutrik® Speakon® in parallel with one two-position terminal strip Enclosure materials & finish: Dado-joined 12 mm birch finished with a textured acrylic polyurethane with a fulllength metal grille covered in acousticalgrade grille cloth. Available in black, white or natural finishes. Dimensions (H x W x D): 14. 56" x 19. 63" x 15. 95" 370 mm x 498 mm x 405 mm Net weight: 29 lbs. (13. 2 kg) Frequency response This measurement is useful in determining how accurately a given unit reproduces an input signal. [. . . ] Available in black, white or natural finishes. Dimensions (H x W x D): 14. 56" x 19. 63" x 15. 95" 370 mm x 498 mm x 405 mm Net weight: 29 lbs. (13. 2 kg) Frequency response This measurement is useful in determining how accurately a given unit reproduces an input signal. [. . . ]