Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual PEAVEY M-4000. We hope that this PEAVEY M-4000 user guide will be useful to you.
Lastmanuals help download the user guide PEAVEY M-4000.
Detailed instructions for use are in the User's Guide.
[. . . ] Your HiSys enclosure has been rigorously tested before packing and despatch to your dealer. impedance The HiSys 215XT is a nominal 4 ohms. [. . . ] Crossover The practice of bi-amplification allows full control over the performance of the drivers used in the HiSys 215XT. for optimum performance , no internal passive crossover is fitted to the HiSys 215XT. An electronic crossover or module will be required with a crossover point of between 100 and 250Hz. We recommend PeaveyÕs PL-100, PL-150 or PL-250 when using the CS series of power amplifiers fitted with crossover islands. Satellite pole facility We have equipped your HiSys 215XT low frequency enclosure with a top-mounted stand adapter. configure the HiSys 1 , 2 , 3 , 4 , 5 or 6XT to its bi-amp mode (refer to the relevant operating guide). For the low frequency enclosure, select between 100 and 250Hz and for the HiSys 1, 2, 4 or 6XT, 1200Hz (with 22XT compression driver EQ). The HiSys 3 and 5XT will need a crossover point of 2000Hz with no EQ. Simply connect the low pass to the input of the low frequency enclosure using Neutrik pins 1+ and 1-. connect the mid pass to the input of the HiSys 1 , 2 , 3 , 4 , 5 or 6XT using Neutrik pins 1+ and 1-. [. . . ] connect the mid pass to the input of the HiSys 1 , 2 , 3 , 4 , 5 or 6XT using Neutrik pins 1+ and 1-. Finally, connect the hi pass to the input of the HiSys 1, 2, 3, 4, 5 or 6XT using Neutrik pins 2+ and 2-. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE PEAVEY M-4000
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual PEAVEY M-4000 will begin.
