User manual PEAVEY MARK VI BASS XP

[. . . ] Mention of software products manufactured by other companies does not necessarily constitute endorsement by the manufacturer . While all reasonable efforts have been made to make this document as accurate and helpful as possible, we make no warranty of any kind, expressed or implied, as to the accuracy or completeness of the information contained herein. The most up-to-date drivers and manuals are available from the web site: http://www. my. okidata. com Trademark Information Oki and Microline are registered trademarks of Oki Electric Industry Company Ltd. Apple, Macintosh and Mac OS are registered trademarks of Apple Computers Inc. [. . . ] Please check the address with the network administrator. If your network environment uses domain names, DNS should be enabled and configured on your system. However, this step is not essential to enable network printing. Restart the operating system. OkiLAN 8100e Network User's Guide Microsoft Windows - 88 2. 3. 4. Windows 95/98/Me 1. Click the [Start] button, select [Settings] and then click [Control Panel]. In the [Control Panel] double-click on the [Network] icon. In the [Network] dialogue box click [Configuration Panel]. If the [Client for Microsoft Networks] is not listed, click [Add]. In the [Select Network Component Type] dialogue box, select [Protocol] then click [Add]. In the [Select Network Protocol] dialogue box, select [Microsoft] from the list of manufacturers, then select [TCP/ IP] from the list of network protocols, then click [OK]. The Windows installation CD-ROM may be required. Connect the printer to the network and turn on. Place the Network Software Utilities disk (or the software CD provided with your printer) in the CD-ROM drive. The set-up utility starts automatically. If the set-up utility does not start, double-click on install. exe in the Windows folder of the CD-ROM. If you agree to the User License Agreement, click [Next]. Select the appropriate network card, using the Ethernet address to identify it, and click [Next]. The Ethernet address (MAC Address) of the printer can be found on the self-diagnostic printout, which can be printed by pressing the push-button on the network card for two seconds and then releasing it. When using lpr in UNIX and other TCP/IP environments, please select [Yes]. To use in a TCP/IP environment, an IP address should be assigned to the Ethernet board. If [Yes] has been selected and TCP/IP is the only working protocol and the IP address has not already been assigned, 3. 8. OkiLAN 8100e Network User's Guide Microsoft Windows - 92 you can either obtain an IP address automatically or assign an IP address. [. . . ] If there are multiple network interface cards, configure the NetWare Port names to be different. OkiLAN 8100e Network User's Guide Troubleshooting - 136 Print Server mode Check the File Server name set in the NIC and on the File Server are the same. Check the Printer name set in the File Server and the NetWare Port name set in the NIC are the same. If there are multiple NICs, configure the NetWare Port names to be different. Check the NetWare login password is correct. [. . . ]