User manual PEAVEY MAX 110

[. . . ] A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding plug. The wide blade or third prong is provided for your safety. [. . . ] Its design makes it perfect as a practice amplifier or for small jam sessions. The built-in Tape/CD jack allows you to jam along with your favorite tunes while the headphone input offers the convenience of practicing privately anytime, day or night. Before you begin playing through your amplifier, it is very important to ensure that the product has the proper AC line voltage supplied. You can find the proper voltage for your amp printed next to the IEC line (power) cord on the rear panel of the unit. Refer to the front panel diagram in this manual to locate the particular features next to their number. Please read this guide carefully to ensure your personal safety as well as the safety of your amplifier. Vintage control with patented Peavey TransTube® circuitry for vintage tube bass amp sound · Plug your bass into this 1/4" jack. Connect your bass prior to turning on the power switch. (2) Gain This control sets the MAX® preamp input gain and works in conjuction with the selected Voicing preset (see 3, Voicing). Rotating the control clockwise increases gain, but your final setting will depend on the output of your bass (passive or active) as well as your playing style. (3) Voicing The Voicing switch offers several EQ and TransTube® gain variations which essentially offer the user several amplifiers in one, each with distinct tonal characteristics. Modern - Based on "West Coast" EQ voicing with no tube simulation Vintage - Based on Peavey TransTube front-end with a vintage tube bass voicing MAX - Based on classic Peavey EQ voicing with no tube simulation (on MAX 115 only) (4) Equalization The EQ section allows for tonal adjustment of the amp model selected in the Voicing section (3) and causes the EQ to respond in a manner similar to the amp being modeled. The EQ controls on the MAX 158, 110 and 112 are of a standard passive type (controls interact depending on setting), while the MAX 115 has an active EQ with independent cut and boost. Low - Rotate the control clockwise to increase the low frequencies Mid - Rotate the control clockwise to increase the mid frequencies Shift (MAX 115 only) - This control provides a semi-parametric EQ that sets the frequency at which the mid control cuts or boosts. Rotating the control clockwise from left to right increases this frequency; it can be set anywhere between 200 Hz and 2 kHz. These RCA input jacks allows you to connect a stereo, tape or CD player to your MAX Series bass amp and play along. (6) Post-EQ EFX Loop (MAX 112 and 115 only) This section allows you to add an effect or connect a CD player post-EQ or after settings have been applied to the EQ section (see 4). Send/CD Input This standard 1/4" input jack allows you to connect a tape or CD player to your MAX Series bass amp and play along. [. . . ] How To Get Warranty Service (1) Take the defective item and your sales receipt or other proof of date of purchase to your Authorized Peavey Dealer or Authorized Peavey Service Center. Include a detailed description of the problem, together with a copy of your sales receipt or other proof of date of purchase as evidence of warranty coverage. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. [. . . ]