User manual PEAVEY PAGEMATRIX

[. . . ] Intended to alert the user to the presence of uninsulated Òdangerous voltageÓ within the productÕs enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: To reduce the risk of electric shock, do not remove cover. WARNING: To prevent electrical shock or fire hazard, do not expose this appliance to rain or moisture. Before using this appliance, read the operating guide for further warnings. [. . . ] Step Two: Installing the MediaMatrix view files: Note: When installing the PageMatrix view files and devices, you will need to know what directory your MediaMatrix software is in (if it is in a different directory than the factory defaults). Insert Disk Two (MediaMatrix view Files) into the floppy drive. This is a self-extracting zip file that will ask you for a directory to place the unzip files. These files can go anywhere on your hard drive, but it is recommended that you install them in the View directory in your MediaMatrix root directory(c:\peavey\views). Insert Disk Two (MediaMatrix view Files) into the floppy drive. This is a self-extracting zip file that will ask you for a directory to place the unzip files. These files MUST go in the Devices directory in your MediaMatrix root directory (c:\peavey\devices\standard\paging) If your root directory is different from the default, enter the proper root directory followed by Òdevices\standard\pagingÓ. Doulbe click the group, then double click the PageMatrix Icon. Note: For systems that are not pre-loaded with PageMatrix, the MediaMatrix Program Launcher can be used. This is found under the MediaMatrix Device/Miscellaneous menu. To assign the button, simply left-click the desired zone to select it (a bold outline appears around the selection), then right-click to confirm (turns red). zones represent physical locations and outputs connected via MediaMatrix BoB outputs , amplifiers , and speakers. Note: If you only use one BoB, a maximum of 8 zones will be available. Programming the Paging Stations with the PageMatrix application [note: see the next chapter (Menu Bar) for additional information] Use the ÒInsert StationÓ or ÒAdd StationÓ (Edit Menu) as necessary to include your hardware stations in the programming. After setting up the PageMatrix application, the layout on the left displays a column listing all the connected paging stations. to the right is a matrix list of zones at the top and columns of buttons by number. Select the station you wish to program first, then use the mouse to activate zones for each button. when finished , download the configuration to the Pagematrix controller (File menu). Now your page station buttons are programmed and ready for use. naming Zone Presets When Using the Station Ten With the Station Ten , a 20 x 2 display is provided for viewing the zone presets. The zone presets are named within the PageMatrix application. when a 10 button station is inserted (Edit/Insert Station) , the LCD Text option appears at the top of the screen. [. . . ] When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time. Servicing is required when the apparatus has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. If this product is to be mounted in an equipment rack, rear support should be provided. [. . . ]