User manual PEAVEY PEL 20S DATASHEET

[. . . ] 13 SNMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 SNMP Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Private MIB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Traps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The IP address must follow the format XXX. XXX. XXX. XXX, where each XXX is a number from 0 to 255. CAUTION: If you select an invalid IP address, you may not be able to access the Network Print Server. · Use Network Protocol - Select this option to use RARP, BOOTP or DHCP to determine the IP address at power up. Specify which protocol(s) to use. Subnet Mask If your network environment includes subnets, you should set the subnet mask. The subnet mask must follow the format XXX. XXX. XXX. XXX, where each XXX is a number from 0 to 255. The Network Print Server interprets a subnet mask of 0. 0. 0. 0 or 255. 255. 255. 255 as no subnet mask specified. TCP/IP 102 OkiLAN 6200e Plus User's Guide CAUTION: If you select an invalid subnet mask, you may not be able to access the Network Print Server. Default Gateway If your local network is attached to other networks, you can specify the address of your default gateway. This gateway will be selected whenever messages need to be sent to another network. The gateway address must follow the format XXX. XXX. XXX. XXX, where each XXX is a number from 0 to 255. CAUTION: If you select an invalid default gateway or the default gateway becomes unavailable, the Network Print Server may not be able to communicate with non-local networks. WINS Server If you are using WINS name resolution, set the address of the WINS Server where the System Name of the Network Print Server will be registered. Bidirectional Printer Status Support Enable this option for enhanced status from the bidirectional printer. SNMP Configuration Options SNMP options specify which information is necessary for an SNMP manger to access the Network Print Server. The system variables are for user convenience and are optional. To configure SNMP specific information, select the SNMP tab. The following screen will display: TCP/IP 107 OkiLAN 6200e Plus User's Guide Note: SNMP options need to be configured only if you are managing an Network Print Server or getting system information using SNMP. Fill in the following information: System Name Enter the name of your choice. This name will identify the Network Print Server in your SNMP-based management program. System Contact Enter any information useful to a user if problems with the Network Print Server arise. System Location Enter a description of the Network Print Server location. TCP/IP 108 OkiLAN 6200e Plus User's Guide Get Community Name This field is used to set the community name required to Get information from the print server. Note: For JetAdmin to function correctly with the Network Print Server, the SNMP Get and Set community name must be set to public. Set Community Name This field sets the community name required to Set information on the Network Print Server. Note: The Network Print Server cannot be configured without the correct Set community name. [. . . ] Whenever you print to the printer configured with OkiNet Connect, your print job goes directly to the print server port. Port Settings If you have printing problems while using the OkiNet Connect printing port, you may check the status of the port. Select the Details tab on the Properties screen and then click the Port Settings button. For more configuration options, click the Configure button. Output Port Configuration Options To configure the Network Print Server output port, select the Output Port tab. Windows Printing 213 OkiLAN 6200e Plus User's Guide Port Number Select the port number you wish to configure. [. . . ]