User manual PEAVEY PR-603 T DATASHEET

[. . . ] Neither TROY nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of accident, misuse or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U. S. ) failure to strictly comply with TROY'S operating and maintenance instructions. Warranty Notice TROY GROUP, INC. SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS OF THIS PRODUCT FOR A PARTICULAR PURPOSE. TROY shall not be liable for any errors contained in this manual or for any damages resulting from loss of use, data profits, or any incidental or consequential damages arising from the use of TROY products or services. Trademark Notice EtherWind and EtherSync are trademarks of TROY Group, Inc. General Notice: Other product names used herein are for identifications purposes only and may be trademarks of their respective owners. [. . . ] Make sure that the Print Server OS is set to BSD (this is the default setting). Select Add To print, use the standard lp command; for example: lp ­dLaserJet filename Notes: We recommend using the /etc/hosts file for the printer name rather than NIS or other name services. Due to a bug in the Sun lpd implementation on Solaris 2. 4 and earlier releases, may cause problems printing very long print jobs. The workaround is to configure the EtherWind as an HP JetDirect card using the HP JetAdmin for UNIX software. Solaris print queues can also be configured from the UNIX shell using the lpadmin command. HP/UX Configuration To configure a print server using HP/UX 10. x, use the sam program and execute the following steps: 1. When you get a list of options, select Printers and Plotters. Select Actions and then Add Remote Printer/Plotter. Enter any name as the Printer Name (this will be the name of the print queue). Enter the IP address of the print server as the Remote System Name. Enter the desired print server service name (BINARY_P1 for binary files or TEXT_P1 for text files) as the Remote Printer Name. Check the box next to Remote Printer is on BSD System. 7-3 9. From any VINES workstation log in as supervisor and run the MANAGE program. At the Manage Users screen, select Add a User. Type in a StreetTalk name for the print server, (entering a password is optional). From the Add User Profile screen select a blank user profile. Enter NO in response to the message "Do you want to force the user to change passwords on the next login?". Press ESCAPE twice to return to the main menu. File Server Queue Configuration 1. Run the MANAGE utility, and from the main menu select 1-Services. From the Manage Services menu, select Add a server-based service and press ENTER. From the Add a Service screen type the desired StreetTalk name for the print queue and press ENTER, followed by a description and press ENTER. 9-1 4. Select the desired File server and press ENTER. Select the disk where the print service will reside. [. . . ] Consult the dealer or an experienced radio/TV technician for help. The radiated output power of EtherWind is far below the FCC radio frequency exposure limits. Nevertheless, the EtherWind shall be used in such a manner that the potential for human contact during normal operation is minimized. WARNING The connection of a non-shielded equipment interface cable to this equipment will invalidate the FCC Certification of this device and may cause interference levels which exceed the limits established by the FCC for this equipment. It is the responsi13-1 bility of the user to obtain and use a shielded equipment interface cable with this device. [. . . ]