User manual PEAVEY PV 6

[. . . ] A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding plug. The wide blade or third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. [. . . ] The input gain can be adjusted over a wide range to compensate for soft voices or very loud drums. To maximize the signal-to-noise ratio, the gain should be set to the proper level with the channel level control (7) set to 0. If the clip LED comes on and remains lit, try reducing the gain. This LED indicates that AC power is supplied to the unit, the power switch is on and the unit is functioning properly. This knob sets the headphone and control room output level. To avoid damage to your hearing, make sure to turn the dial fully counterclockwise before using headphones. Slowly turn the knob clockwise until a comfortable listening level is set. Two four-segment LED arrays are provided to monitor the levels of the main Left/Right outputs. These meters range from -21 dB to +19 dB. This LED lights when the Phantom Power Switch (13) has been engaged. If phantom power is used, do not connect unbalanced dynamic microphones or other devices to the XLR inputs that cannot handle this Voltage. The Phantom Power LED (12) indicates when phantom power is on. Depressing this switch adds the tape return to the Control Room and Headphone Outputs (24) for zero latency monitoring. Depressing this switch routes the signal from the Tape Inputs to the Main Outputs (27). Best results are obtained when this control is set near the 0 point. Engaging this switch enhances the signal by adding both bass and treble frequencies. This is especially effective at lower volumes or for tape/CD playback. When engaged, it can improve clarity by removing low frequencies that can make a mix sound muddy. This feature is especially useful when playing outside on a windy day or on a hollow, noisy stage. These kinds of ambient noises can rob your sound system of power. Engaging this switch removes those frequencies from the system and restores power to where it's needed. The EFX/Return Level Control adjusts the level sent to the Left/Right main bus from the return inputs. [. . . ] If the repairs are covered by warranty, Peavey will pay the return shipping charges. How To Get Warranty Service (1) Take the defective item and your sales receipt or other proof of date of purchase to your Authorized Peavey Dealer or Authorized Peavey Service Center. Include a detailed description of the problem, together with a copy of your sales receipt or other proof of date of purchase as evidence of warranty coverage. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. [. . . ]