User manual PEAVEY PV 8

[. . . ] A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding plug. The wide blade or third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. [. . . ] When it lights, roughly 3 dB of headroom remain. This is the channel output level control. This LED lights when the Phantom Power Switch (11) has been engaged. If phantom power is used, do not connect unbalanced dynamic microphones or other devices to the XLR inputs that cannot handle this Voltage. The Phantom Power LED (10) indicates when phantom power is on. The EFX/Return Level Control adjusts the level sent to the Left/Right main bus from the return inputs (30). Depressing this switch adds the tape return to the Control Room (32) and Headphone Outputs (20) for zero latency monitoring. Depressing this switch routes the signal from the Tape Inputs (38) to the Main Outputs (31). This LED indicates AC power is supplied to the unit, the power switch is on and the unit is functioning properly. This is the master output level control for the monitor mix. The output level sent to the Monitor Send jack (33) is controlled by the channel monitor send controls (5) and by this master control. This is the master output level control for the EFX mix. The output level sent to the EFX Send jack is controlled by the channel level controls (9), the channel EFX send controls (6) and by this master control. Engaging this switch enhances the signal by adding both bass and treble frequencies. This is especially effective at lower volumes or for tape/CD playback. When engaged, it can improve clarity by removing low frequencies that can make a mix sound muddy. This feature is especially useful when playing outside on a windy day or on a hollow, noisy stage. These kinds of ambient noises can rob your sound system of power. Engaging this switch will remove those frequencies from the system and restore power to where it's needed. When the Tape to Control Room switch is engaged, the tape input signal is added to the Left/Right mix and can be monitored in the headphones. This knob sets the headphone and control room output levels. To avoid damage to your hearing, make sure to turn the dial fully counterclockwise before using headphones. [. . . ] What This Warranty Does Not Cover The Warranty does not cover: (1) damage caused by accident, misuse, abuse, improper installation or operation, rental, product modification or neglect; (2) damage occurring during shipment; (3) damage caused by repair or service performed by persons not authorized by Peavey; (4) products on which the serial number has been altered, defaced or removed; (5) products not purchased from an Authorized Peavey Dealer. Who This Warranty Protects This Warranty protects only the original retail purchaser of the product. 2 years *(+ 3 years) 2 years *(+ 1 year) 3 years *(+ 2 years) 1 year *(+ 1 year) 2 years 1 year 90 days [*Denotes additional warranty period applicable if optional Warranty Registration Card is completed and returned to Peavey by original retail purchaser within 90 days of purchase. What Peavey Will Do We will repair or replace (at Peavey's discretion) products covered by warranty at no charge for labor or materials. [. . . ]