User manual PEAVEY Q 215B

[. . . ] In other words, see the light pull down the fader. For the Q 215B, lower each fader until the feedback frequency is found. Lower the faders in small amounts to avoid adversely affecting sound quality. Typical sound reinforcement enclosures are not designed for 20 Hz performance, and transducer damage could result from "over-boosting" low frequencies. [. . . ] TRS BALANCED INPUT These1/4" Tip/Ring/Sleeve (stereo) jacks provide balanced input when used with TRS connectors and 2-conductor shielded cables. When used with mono 1/4" (TS) phone plugs, the input is unbalanced. XLR INPUT These female 3-pin connectors provide balanced input when used with male XLR connectors. * All specifications are typical unless otherwise noted. All specifications are referenced to nominal output level (0 dBV) unless otherwise stated. NOTE: All specifications measured at 1 V RMS input, unbalanced output, sliders at mid position, and all switches out unless otherwise noted. Cuando se use un cable mono de 1/4" (TS) tipo phone, la entrada no es balanceada. * All specifications are typical unless otherwise noted. All specifications are referenced to nominal output level (0 dBV) unless otherwise stated. NOTE: All specifications measured at 1 V RMS input, unbalanced output, sliders at mid position, and all switches out unless otherwise noted. What This Warranty Does Not Cover The Warranty does not cover: (1) damage caused by accident, misuse, abuse, improper installation or operation, rental, product modification or neglect; (2) damage occurring during shipment; (3) damage caused by repair or service performed by persons not authorized by Peavey; (4) products on which the serial number has been altered, defaced or removed; (5) products not purchased from an Authorized Peavey Dealer. Who This Warranty Protects This Warranty protects only the original retail purchaser of the product. Speakers, baskets, drivers, diaphragm replacement kits and passive crossovers) and all Accessories Tubes and Meters Duration 2 years *(+ 3 years) 2 years *(+ 1 year) 3 years *(+ 2 years) 1 year *(+ 1 year) 2 years 1 year 90 days [*Denotes additional warranty period applicable if optional Warranty Registration Card is completed and returned to Peavey by original retail purchaser within 90 days of purchase. What Peavey Will Do We will repair or replace (at Peavey's discretion) products covered by warranty at no charge for labor or materials. If the product or component must be shipped to Peavey for warranty service, the consumer must pay initial shipping charges. If the repairs are covered by warranty, Peavey will pay the return shipping charges. How To Get Warranty Service (1) Take the defective item and your sales receipt or other proof of date of purchase to your Authorized Peavey Dealer or Authorized Peavey Service Center. Include a detailed description of the problem, together with a copy of your sales receipt or other proof of date of purchase as evidence of warranty coverage. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. [. . . ] All service work should be done by a qualified service technician. This product should be used only with a cart or stand that is recommended by Peavey Electronics. Exposure to extremely high noise levels may cause a permanent hearing loss. Individuals vary considerably in susceptibility to noise induced hearing loss, but nearly everyone will lose some hearing if exposed to sufficiently intense noise for a sufficient time. [. . . ]