User manual PEAVEY VTS 1000 DATASHEET

[. . . ] While all reasonable efforts have been made to make this document as accurate and helpful as possible, we make no warranty of any kind, expressed or implied, as to the accuracy or completeness of the information contained herein. The most up-to-date drivers and manuals are available from the Oki web site: http://my. okidata. com Copyright © 2005 Oki Data Americas, Inc. This publication is protected by copyright, and all rights are reserved. No part of it may be reproduced or transmitted in any form or by any means for any purpose without express prior written consent from Electronics for Imaging, Inc. [. . . ] If each output profile contains a unique calibration target, the curves displayed also change when you switch profiles. Restoring default calibration measurements The ES3640e MFP is shipped with default calibration measurements. You can use these measurements to achieve ES3640e MFP Color Guide - 47 2 2-48 Color Calibration acceptable color without calibration. If the measurement device you use does not produce acceptable color, you can easily return to the default measurements. ES3640e MFP Color Guide - 48 2 2-49 Using the EFI Spectrometer ES-1000 To restore default calibration measurements 1. In the main Calibrator window, click Restore Device. Click OK to restore the preset default calibration set. Note: Restore Device applies only to the currently selected calibration set. Using the EFI Spectrometer ES-1000 The EFI Spectrometer ES-1000 is a hand-held spectrophotometer that measures the spectral light reflected from printed output and other colored materials, as well as the density of printed ink and toner. It uses the density measurements to effectively calibrate the Fiery. Setting up the ES-1000 To use the ES-1000 for calibration purposes, you must first set it up for use with your computer. For complete instructions on setting up the ES-1000, see the documentation that is included with the instrument. ES3640e MFP Color Guide - 49 2 Measure button Sample aperture White tile reference 2-50 Color Calibration The following illustration shows the different parts of the ES-1000. Calibration cradle Calibrating the Fiery with the ES-1000 You can use ColorWise Pro Tools in conjunction with the ES-1000 to calibrate the Fiery. To calibrate the Fiery using the ES-1000 1. Start Calibrator. For instructions on starting Calibrator, see page 2-44. 2. Choose EFI Spectrometer ES-1000 as the measurement method. In the Check Print Settings pane, choose the desired calibration set. Choose the appropriate calibration set for the mode and type of media which are needed for calibration. Note: For this calibration to take effect, the calibration set must be associated with one or more output profiles. Click OK in the Information dialog box. This completes the Fiery calibration process. Using the EFI Densitometer ED-100 The EFI Densitometer ED-100 is a hand-held instrument that measures the density of printed ink and toner. Like the DTP32, the ED-100 is a reflection densitometer that you can use to calibrate the Fiery. Setting up the ED-100 To use the ED-100 for calibration purposes, you must first set it up for use with your computer. For complete instructions on setting up the ED-100, see the documentation that is included with the instrument. The following illustration shows the components of the ED-100. Indicator Measure button Sample aperture (underneath) ES3640e MFP Color Guide - 53 2 2-54 Color Calibration Calibrating the Fiery with the ED-100 You can use ColorWise Pro Tools in conjunction with the ED-100 to calibrate the Fiery. To calibrate the Fiery using the ED-100 1. Start Calibrator. For instructions on starting Calibrator, see page 2-44. 2. Choose EFI Densitometer ED-100 as the measurement method. In the Check Print Settings pane, choose the desired calibration set. Choose the appropriate calibration set for the type of media you will use most often. Note: For this calibration to take effect, the calibration set must be associated with one or more output profiles. There is no need to make any new associations for the default calibration set, since it is already associated with the default output profile. 4. In the Generate Measurement Page pane, click Print. The Print Options dialog box appears. 5. Choose the appropriate options and click Print. For Page Type, choose 21 Sorted Patches. Sorted patches are printed on the page in the order of their hue and saturation levels. [. . . ] The densitometer automatically returns to the MAIN MENU. If UNRECOGNIZABLE STRIP appears, repeat the process or try cleaning the strip (see the X-Rite DTP32 Operating Manual). Recalibrate the DTP32 at least once per month. For critical color, calibrate the densitometer every time you calibrate the Fiery. The DTP32 may also warn periodically that it requires calibration. ES3640e MFP Color Guide - 108 B B-109 Importing Density Measurements Appendix B: Importing Density Measurements This appendix describes Simple ASCII File Format, which can be used to import density measurements from measurement devices. [. . . ]