User manual PELONIS HC-461

[. . . ] Arrange cord away from traffic area and where it will not be tripped over. To disconnect heater, first turn controls to off, then remove plug from outlet. Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater. To prevent a possible fire, do not block air intakes or exhaust in any manner. [. . . ] Your Disc Furnace is built to last and deliver outstanding performance for years. Unlike other portable heaters, it uses a patented electronic temperature control that automatically monitors the exact room temperature and compensates for heat loss. As a result, maximum comfort and energy efficiency are realized. The Room Temperature Display C" displays the actual room temperature when the heater is plugged in or during operation. When the heater is operating and the room temperature near the heater reaches the desired set temperature, the Temperature Set Light "E" will illuminate. Note: To turn off the room temperature display, you must unplug the heater. Place the heater on a firm level surface free from obstructions, and at least 3 ft. Away from any wall and any other objects such as furniture, curtains, plants or combustible material. With the Power Button "A" in the "OFF" position, plug the heater into a grounded 120V outlet. The desired temperature will be set after the LED display stops flashing. NOTE: When the desired temperature is set after the LED display stops flashing, the Room Temperature Display "C" will change to display the room temperature. To view the set temperature at any time during the heater's operation, press the Thermostat Control "B" button "UP" or "DOWN". the Room Temperature Display "C" will flash the desired temperature that has been set. When the display stops flashing, it will change to show the actual room temperature. For most efficient heating, place the heater on the floor where the air is cooler, and about 3 feet from any wall. To heat your room, the heater will be most efficient when placed near an outside door, the bottom of a staircase, or where colder air is most likely to be entering the room. The filter collects dirt and dust from air circulating through the heater. To clean the filter, rinse it with warm water and allow it to dry before reinstalling. Ambient Temperature Sensor (located on the power cord behind the heater) ­ senses the surrounding room temperature and automatically adjusts the heat output. ⷠSafety Tip Over Switch ­ shuts the heater off if it tips over. ⷠConvenient Carry Handle ­ allows for easy transport from room to room. For usage tips about this heater, to register your heater warranty online, or to obtain information about other Pelonis USA products, please visit our website at www. [. . . ] In the event of malfunctions or failure of your Pelonis Disc Furnace ceramic heater, simply deliver or send the heater, postage prepaid along with PROOF OF PURCHASE, within the warranty period of seven (7) year, to Pelonis USA. Pelonis USA reserves the right to inspect the claimed defective part or parts to determine if the defect or malfunction complaint is covered by this warranty. Pelonis USA shall, within sixty (60) days after receipt of the product, at its option, repair and/or replace the defective part or parts free of charge. This warranty shall only cover defects arising from normal usage. [. . . ]