User manual PENDRIVE SECUREPENDRIVE

[. . . ] SecurePenDrive User Manual Ver 1. 00 - B Page 1 Table of Contents 1 2 3 4 5 6 7 8 9 New Features······················ Important Notice····················· Main Screen······················ Setup password····················· Change password···················· Disable / Remove password················ Unlock device····················· Password hint····················· 3 3 4 5 7 8 9 10 Format························ 11 Page 2 New Features 1. (maximum 16 characters) Allows user to enter "Password Hint", in case user forgot about their password Automatically format the "Protected" part of the USB Disk Pro when enter wrong password 6 times. [. . . ] ­ don't worry, let password hint remind you Format ­ allow user to set the capacity of the "protected" area Page 4 Apparatus A ­ Setup Password (1) Press "Set Password" to setup password, you will see the following screen (2) Enter a password of your choice. (maximum 16 characters long) (3) Confirm password by re-enter the password you set in (2). (4) Enter a hint of your own, in case you forget your password. You can enter anything you want within 31 characters. 2 3 4 PS : Tick "Unmask Password" box to see what are you typing or what you have entered (5) Press "Set" to confirm changes. You will see the following message window pop up. This message window tells you, that the device will be automatically locked after you remove the device from USB port. Page 5 (6) Once you have set up the password correctly, you will notice the change in "Password Exist" Status. NOTE When you remove the device from USB port and re-insert it again, the device will automatically be locked. If you try to access it, it will reply with some error message. (depending on the operating system, the error message will be different) If you execute the Security AP, you will see that the device is LOCKED. Page 6 Apparatus A ­ Change Password (1) If you have already setup a password before, you can change the password you set. Click "Change Password" to change. (2) Enter your old password (3) Enter new password of your choice (4) Confirm the new password by re-enter (5) Change password hint if you wish. PS : (i) Password Hint does not have to enter/change, if you don't want to use it or You want to use the old hint. [. . . ] eg: In this case, the protected area is a bit over 14MB and the unprotected area will be what ever is left. (as shown below) Protected Area Unprotected Area Page 11 [. . . ]