User manual PENTAX EI 200

[. . . ] OPERATING MANUAL In The Beginning Thank you very much for buying the Pentax EI-200 digital camera. Please read this document before use in order to make the most of this product's functions and keep it safe after reading. This document will prove very useful if you do not understand how to use the camera or wish to know more about the functions. Regarding copyrights Images taken using the EI-200 that are for anything other than personal enjoyment cannot be used without permission according to the rights as specified in the Copyright Act. Please take care, as there are even cases where limitations are placed on taking pictures even for personal enjoyment during demonstrations, industrial enterprise or as items for display. [. . . ] Use the right and left arrows of the fourway controller for selection. Each time you press the right arrow, the following stamping position options will be displayed in this order: [Upper Right] / [Center] / [Lower Left] / [Lower Right] / [Upper Left] x Background of Letters (Transparency) When stamping letters on a picture, you can decide how the image corresponding to the input letters to be stamped is handled. Use the right and left arrows of the four-way controller for selection. [Opaque] . . . . Background (or background color) is provided for the input letters to be stamped on a picture. [Semi] . . . . . . . . A semi-transparent background (or background color) is provided for the input letters to be stamped on a picture. [Clear] . . . . . . . . No background (or background color) is provided for the input letters on a picture (i. e. , only the letters are stamped). x Color of Letters You can set the color of the letters to be stamped. Use the right and left arrows of the four-way controller for selection. Each time you press the right arrow, the following choice of colors to be set will be displayed in this order: [Red] / [Green] / [Blue] / [Cyan] / [Magenta] / [Yellow] / [Black] / [White] x Background color When you select [Clear] for the background of letters, you can set the background color of the letters. Use the right and left arrows of the four-way controller for selection. Each time you press the right arrow, the following choice of colors to be set will be displayed in this order: [Red] / [Green] / [Blue] / [Cyan] / [Magenta] / [Yellow] / [Black] / [White] Using Various Functions [Text Stamp] screen after setting 67 How to set a logo to be stamped on a picture - Logo You can stamp a logo saved in the memory card on a picture. A logo file is not attached with when the camera has just been purchased, so this function can not be used at present. x Retrieve the logo file Retrieve the logo file in the memory card. x Stamping Position Upper right Center Lower left Lower right Upper left 1 Show [Logo Stamp] screen. 1Install the memory card containing the logo file. 2Turn on the power supply and set the mode dial to the capture mode mark. 3Press the menu button, and the [Capture Settings] menu appears. 4Press the right arrow of the four-way controller twice, and the [Image Stamp] menu appears. 5Press the lower arrow of the four-way controller twice, and [Logo] is displayed in highlighted text. 6Press the left soft key to select [Edit] on the soft menu. The [Logo Stamp] screen is then displayed. [Image Stamp] menu 68 Stamping Date & Time And Text On A Picture 2 Set the stamping format of the logo 1While the stamp logo function is [Off] and indicated in highlighted text, press the right and left arrows of the four-way controller, and the stamp text function [On] will then be displayed in highlighted text. 2Press the left soft key to select [Edit] on the soft menu, and a logo file screen appears. 3Press the upper and lower arrows of the four-way controller to display a logo file to be stamped in highlighted text. [. . . ] In any case, however, shipping charges and customs clearance fees are to be borne by the sender. To prove the date of your purchase when required, please keep the receipts or bills covering the purchase of your equipment for at least a year. Before sending your equipment for servicing, please make sure that you are sending it to the manufacturer's authorized representatives or their approved repair shops, unless you are sending it directly to the manufacturer. Always obtain a quotation for the service charge, and only after you accept the quoted service charge, instruct the service station to proceed with the servicing. [. . . ]