User manual PENTAX EI-C90

[. . . ] This software is licensed as is, and the authors of this software, listed below, do not accept any responsibility for damage resulting from its use. Copyright Ichikawa Soft Laboratory Co. , Ltd. copyrights this guide and other printed materials included in the software package with all rights reserved. The CD-ROM included in this software package includes redistributed modules copyrighted by Microsoft Corporation. [. . . ] To open ISL_CAM through another application using the TWAIN driver (you must refer to your software's documentation for how to acquire images through TWAIN import): · You will be prompted to select input source. Select "TWAIN 16 Data Source for ISL_CAM" (for Windows 3. 1), or "TWAIN 32 Data Source for ISL_CAM" (for -7- Windows 95/NT. ) Now, the Camera Selection screen is displayed. Highlight "PENTAX EI-C90" and click "Set-up (O). . . " to display the Configuration Screen. Select the Serial Port to which the camera is attached (usually COM1 - COM4. ) Select the Baud Rate for file transfer speed (usually 115. 2 Kbps unless your computer is not capable of transferring data at this rate. ) Then select the source of the images under the Memory heading. If you have images stored in both the camera's internal memory as well as on the PC Card, you will have to first transfer images from one source, then switch to the other source to transfer the remaining images. Click OK to complete the setup procedure, then click OK in the camera selection screen. Macintosh After installation, you can find the ISL_CAM utility and related files in the System Folder. You will also find a -8- Photoshop plug-in bridge installed in the same folder as your Photoshop plug-ins compatible application. Note, you may need to actually place the plug-in bridge into your plug-ins folder to make it available to your image-editing application. To open the ISL_CAM utility directly: · Double click on the ISL_CAM application in your system folder. Then choose Camera Selection in the Camera menu. To open ISL_CAM through another application using the plugin bridge (you must refer to your software's documentation for how to acquire images): · Choose Acquire (or Import) "ISL_CAM. . . " from your application's Acquire menu. Now, the Camera Selection screen is displayed. Highlight "PENTAX" and click "Set-up" to display the Configuration screen. Select the Serial Port to which the camera is attached (either the Printer or Modem port. ) Select the Baud Rate for file transfer speed (usually 115. 2 Kbps unless your Mac is not capable of -9- transferring data at this rate. ) Then select the source of the images under the Target heading. If you have images stored in both the camera's internal memory as well as on the PC Card, you will have to first transfer images from one source, then switch to the other source to transfer the remaining images. Click OK to complete the setup procedure, then click OK in the Camera Selection screen. 5. Image Transfer: From Camera Windows In Windows, if you are using the ISL_CAM utility directly, after selecting and setting up the camera, you will need to then launch "ISL_CAM" (for Windows 3. 1) or "ISL_CAM [32 bit]" (for Windows 95/NT) also in the Pentax directory (Start Menu: Programs: Pentax. ) For image transfer from within a TWAIN compliant application, clicking OK in the Camera Selection screen will take you immediately into the image transfer process. Note, if you had check marked "Specify Displaying Images(S)" in the Camera Selection screen, a separate dialogue box will appear allowing you to choose which starting image you would like to display in the ISL_CAM Main Window. If everything is setup properly and the camera is connected to the A/C adapter, the ISL_CAM Main Window should appear, and image thumbnails should begin to download. Once all of the thumbnails have downloaded, you can begin image file -10- transfer. · Click on the image you wish to download to your computer to select it. [. . . ] · The "Delete" button will delete the selected images from the camera's memory. Note, this will erase the images completely from the camera's storage; be careful not to delete any necessary image. Function" button will allow you to switch the source location for the images. If you have images stored in both the camera's internal memory and in the PC Card's memory, this button will allow you to transfer your images from both locations. [. . . ]