Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual PENTAX H55ZME. We hope that this PENTAX H55ZME user guide will be useful to you.
Lastmanuals help download the user guide PENTAX H55ZME.
Detailed instructions for use are in the User's Guide.
[. . . ] The lenses having CE marking on their bodies are conformity with the standards EN50130-4 and EN55022 related to EMC directives by EU. With 4-pin connector model conforming to JEITA By inputting power to potentiometers, they output position voltage. [. . . ] This alerts users to the possible risk of personal and material harm. Connectors vary according to lens model and type (1, 2, 3 & 5) distinguished by the number after the hyphen, denoting different wiring and operating voltages. Metering method of the auto-iris can be linearly adjusted from average metering to peak metering (Pk). In case contrast of the image is too high or low, make adjustment according to the following table. Images ALC adjustment direction To make contrast lower Clockwise to (Pk) To make contrast higher Counter-clockwise to (Av) Please Note: · ALC may not function due to backlight compensation and AGC of the camera or cameras with a digital video output. Do not look at the sun through the lens with the naked eye. If the lens emits smoke, smells of smoke or gives off heat, discontinue use immediately. Do not damage, bend, twist or pull on the cable. Note: Pin number 5, 6, 7, 8 and 9 used for iris remote control (F-type lens only). Do not install the lens in a place where vibration and shock are expected. Auto-iris sensitivity can be adjusted in accord with the camera. When images are too dark, too bright or there is no image, make the adjustment according to the following table. [. . . ] Manual control of the iris can be achieved by applying a voltage of between DC1. When SW1 is closed, the iris is in manual override mode. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE PENTAX H55ZME
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual PENTAX H55ZME will begin.
