User manual PENTAX MAGIC IMAGE ATTACHMENTS 2C, 4C, 5C, 6M, CF

[. . . ] for PENTAX cannot be used if system requirements are not met. ). Operation is not guaranteed on all PCs meeting the system requirements. USB connection · OS : Mac OS 9. 2/X (Ver. 10. 1, 10. 2, 10. 3) · USB port must be standard equipment Installation of the driver is not necessary. Application Software Macintosh · ACDSee for PENTAX (Image viewing software) ACD photostitcher (Panorama image editing software) Step 5 on reverse side Step 5 on reverse side <ACDSee for PENTAX and ACD photostitcher> (6 languages: English, French, German, Spanish, Italian, Japanese) · OS : Mac OS 9. 2 or later (requires QuickTime 6 or later and the latest version of CarbonLib) · CPU : PowerPC 266MHz or higher · Memory : 8MB minimum · Hard Disk space : 6MB minimum Connect the camera and your PC, and transfer images. Connect the camera and your Macintosh, and transfer images. Enjoy viewing and editing images transferred to your computer with the image processing software (ACDSee for PENTAX). Operation is not guaranteed on all PCs meeting the system requirements. For details, see the "ACDSee for PENTAX User Guide" supplied with AF011101/ENG Copyright © PENTAX Corporation 2005 FOM 01. 06. 2005 Printed in Belgium the software. Windows Step 2 Installing the USB Driver For Windows98/98SE users, it is necessary to install a USB driver into your computer. If you are a Windows Me/2000/XP user, turn on your computer first and start from Step 6 in the instruction. 6 Windows Turn your camera off and plug the provided USB cable into your camera and into an available USB port on your computer. Confirm that the USB Connection mode is set to [PC] before connecting the USB cable. [. . . ] 2) Double-click the CD-ROM Drive (S-SW35) icon. 3) Double-click [Setup] (Setup. exe). 3 Click your applicable language. You can choose the languages from the displayed screen. A selection screen to install your desired software is displayed. 1 2 7 Turn your camera on. Your computer will automatically detect the camera as new hardware and window will display a notification confirming [Hardware Found : PENTAX OPTIO S5z] (Windows Me/2000/XP) or [Search for the best driver for your device (Recommended)] (Windows 98/98SE) in the task bar recognized area to begin the installation. Turn your PC on. Insert the CD-ROM (S-SW35) into the CD-ROM drive. The PENTAX Software Installer screen appears shortly. · If the PENTAX Software Installer screen does not appear Display the PENTAX Software Installer screen following the steps below. 1) Double-click [My Computer] on the desktop. 2) Double-click the [CD-ROM drive (S-SW35)] icon. If your PC is running Windows Media Player earlier than version 7. 1, a message such as the one shown on the right may appear during installation. In this case, follow the instructions below to update Windows Media Player before installing the software. 1 Cancel installation of ACDSee for PENTAX. [Cancel] and click [Finish] when the message appears telling you that the software has been successfully installed. Press the OK button. 6 Double-click [Removable Disk]. Exit · Do not connect the camera to your PC while [PictBridge] is selected for the USB Connection mode. · Do not connect the camera to your printer while [PC] is selected for the USB Connection mode. If the SD Memory Card has a volume label, the volume label name appears instead of [Removable Disk]. A new unformatted SD Memory Card may show the manufacturer name or model number. 1 2 3 4 5 Turn your Macintosh on. Insert the CD-ROM (S-SW35) into the CD-ROM drive. Double-click the [Install ACDSee] icon. The PENTAX Software Installer screen appears. Double-click the [Master Installer] icon to display the PENTAX Software Installer screen. You can choose the languages from the displayed screen. A selection screen to install your desired software appears. Windows Step 5 7 Double-click the [DCIM] folder. Images are stored in folder [xxxPENTX], where "xxx" is a threedigit folder number. Transferring Images to a Windows PC If you connect your computer to the camera and as the power is switched on, the camera will be recognized automatically. You can transfer an image to your computer after ACDSee Device Searching display appears on the screen. · If the digital camera is connected to your PC in [PictBridge] USB Connection mode, the images cannot be transferred. Disconnect the USB cable from your camera and PC, follow the instructions in "Setting Up Your Digital Camera" to set the USB Connection mode to [PC], and then reconnect the USB cable. · We recommend using an AC Adapter D-AC8 (optional) when connecting your camera to your computer. Your image data could be corrupted if your batteries run out during image transfer. 6 8 Select the folders you want to copy to the PC. Hold the [Ctrl] key on the keyboard while clicking on the folders in which the images you want to copy are stored. Select folders Click [ACDSeeTM]. The setup screen appears. [. . . ] · While communicating with your computer via a USB cable, the status lamp blinks green. · If there is no SD Memory Card in the camera, the images stored in the built-in memory will be transmitted to your PC. · Even if camera images are not transferred, they can be directly displayed on the computer from a camera connected to the computer. · When you edit an image, transfer the image to your computer. [Safely Remove Hardware] icon Macintosh Step 5 Transferring Images It is convenient to use iPhoto, ImageCapture, or ACDSee Device Detector when you transfer an image to your Macintosh. [. . . ]