User manual PENTAX MOTOR DRIVE MX

[. . . ] Images taken with the purpose of obtaining copyrights also cannot be used outside the scope of use of the copyright as laid out in the Copyright Act, and care should be taken here also. Regarding trademarks · PENTAX, Optio and smc PENTAX are trademarks of PENTAX Corporation. · All other brands or product names are trademarks or registered trademarks of their respective companies. To users of this camera · There is a possibility that recorded data may be erased or that the camera may not function correctly when used in surroundings such as installations generating strong electromagnetic radiation or magnetic fields. [. . . ] The flash will not discharge, regardless of the brightness. Use this Flash Off mode to take pictures where flash photography is prohibited. The flash discharges regardless of the brightness. You can select Flash On the Rear-Curtain Flash. Auto + This mode reduces the phenomenon of red eyes caused by the Red-eye light from the flash being reflected in the subject's eyes. The flash reduction discharges automatically. Flash On + This mode reduces the phenomenon of red eyes caused by the Red-eye light from the flash being reflected in the subject's eyes. The flash reduction will discharge regardless of the light conditions. Auto When the Zoom Position is toward /, taking pictures with the flash may cause an edge of the picture to appear dark. · The flash will not discharge (Flash Off) in C mode or ^ mode, or when the drive mode is set to j, a or _, or when the focus mode is set to s or r. · A pre-flash discharges when using the red-eye reduction function. 1 2 Press the { button in A mode. The Fn guide appears. Press the four-way controller (4). The flash mode changes each time the button is pressed. Mode A pull-down menu appears. Use the four-way controller (23) to change the quality level. Press the shutter release button halfway. Recorded Pixels 2560x1920 Quality Level White Balance AF Setting AE Metering Sensitivity Auto MENU Cancel OK OK The Quality Level setting is saved and the camera returns to capture status. Refer to Step 6 of "How to Use the Menus" (p. 45) for other operations after the setting has been made. Recorded Pixels and Quality Level 1p. 22 81 5 MENU Rec. Mode My 1 2, 3, 4 Recorded Pixels 2560×1920 Quality Level White Balance AF Setting Multiple AE Metering Sensitivity Auto MENU Exit RFC Adjusting the White Balance 4 Taking Pictures 82 You can take pictures in natural colors by adjusting the white balance according to the light conditions at the time of shooting. White Balance F Auto Daylight Shade Tungsten Light Fluorescent Light Manual The camera adjusts the white balance automatically. Use this mode when taking pictures outside in sunlight. Use this mode when taking pictures outside in the shade. Use this mode when taking pictures under electric or other tungsten light. Use this mode when taking pictures under fluorescent light. Use this mode when adjusting the white balance manually. G H I J K 1 2 3 4 Press the 3 button in A mode or C mode. The [A Rec. Mode] menu appears. Use the four-way controller (23) to select [White Balance]. Press the four-way controller (5). The White Balance screen appears. White Balance Use the four-way controller (23) to change the setting. MENU Cancel OK OK 5 Press the shutter release button halfway. The White Balance setting is saved and the camera returns to capture status. [. . . ] Always obtain a quotation for the service charge, and only after you accept the quoted service charge, instruct the service station to proceed with the servicing. 9 Appendix 176 · This warranty policy does not affect the customer's statutory rights. · The local warranty policies available from PENTAX distributors in some countries can supersede this warranty policy. Therefore, we recommend that you review the warranty card supplied with your product at the time of purchase, or contact the PENTAX distributor in your country for more information and to receive a copy of the warranty policy. 9 Appendix The CE Mark is a Directive conformity mark of the European Community. 177 For customers in USA STATEMENT OF FCC COMPLIANCE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. [. . . ]