User manual PENTAX OPTIO P80 MINT OPTIO P80

[. . . ] Digital Camera Operating Manual To ensure the best performance from your camera, please read the Operating Manual before using the camera. Thank you for purchasing this PENTAX Digital Camera. Please read this manual before using the camera in order to get the most out of all the features and functions. Keep this manual safe, as it can be a valuable tool in helping you to understand all the camera's capabilities. Regarding copyrights Images taken using the PENTAX Digital Camera that are for anything other than personal enjoyment cannot be used without permission according to the rights as specified in the Copyright Act. Please take care, as there are cases where limitations are placed on taking pictures even for personal enjoyment during demonstrations, performances or of items on display. [. . . ] · When set to c (Digital SR) mode, only Auto (sensitivity 64 - 6400) is available. · When set to S (Fireworks) mode, the sensitivity is fixed at its minimum setting. · If you change the [Sensitivity] setting frequently, you can save time by assigning it to the Green button (p. 121). Saving the Sensitivity setting 1p. 127 3 Taking Pictures Setting Blink Detection This specifies whether Blink Detection function works when you use the Face Recognition function. The default setting is O (On). 1 2 3 Press the 3 button in A mode. The [A Rec. Mode] menu appears. Use the four-way controller (23) to select [Blink Detection]. Use the four-way controller (45) to select O or P. O P Blink Detection function works. Blink Detection function does not work. Rec. Mode EV Compensation Movie D-Range Setting Blink Detection Digital Zoom Instant Review MENU 2/4 0. 0 The setting is saved. Exit 4 Press the 3 button. The camera returns to capture status. Blink Detection 1p. 69 115 Setting Pixel Track SR You can set this function to correct camera shake which occurs during shooting. If you set Pixel Track SR, the camera automatically corrects any camera shake in the images you shot. The default setting is P (Off). Use the Movie SR function (p. 126) to correct camera shake in C (Movie) mode. 3 Taking Pictures 116 1 2 3 Press the 3 button in A mode. The [A Rec. Mode] menu appears. Use the four-way controller (23) to select [Pixel Track SR]. Use the four-way controller (45) to select O or P. O P Corrects camera shake. Mode 1/4 Pixel Track SR Recorded Pixels 12M AWB White Balance Focusing Area AE Metering Sensitivity Auto MENU Exit 4 Press the 3 button. The camera returns to capture status. One of the following icons appears on the display. M f When [Pixel Track SR] is set to O When the shutter release button is pressed halfway with [Pixel Track SR] set to P, and the shutter speed is slow or the flash mode is set to a (Flash Off) (Camera shake warning). When [Pixel Track SR] is set to O, camera shake is corrected after shooting, and then the corrected image is saved. The Pixel Track SR function does not work in the following situations: - When C (Half-length Portrait), C (Movie), S (Fireworks), N (Frame Composite), X (Digital Wide) or F (Digital Panorama) mode is selected as the shooting mode - When g (Self-timer), j (Continuous Shooting) or K (Burst Shooting) is selected as the drive mode - When the flash discharges - When the sensitivity is set to 1600 or higher - During Voice Recording Setting the Instant Review Use this setting to specify whether or not an Instant Review is displayed immediately after images are shot. The default setting is O (On). 3 Taking Pictures 1 2 3 Press the 3 button in A mode. The [A Rec. Mode] menu appears. Use the four-way controller (23) to select [Instant Review]. Use the four-way controller (45) to select O or P. O P Instant Review is displayed. Mode EV Compensation Movie D-Range Setting Blink Detection Digital Zoom Instant Review MENU 2/4 0. 0 Exit 4 Press the 3 button. The camera returns to capture status. Instant Review 1p. 69 If the Blink Detection function worked when shooting, the message [Closed eyes have been detected] appears for 3 seconds during Instant Review. 117 Setting the Image Sharpness (Sharpness) You can give the image sharp or soft outlines. 1 2 3 3 Taking Pictures 118 Press the 3 button in A mode. The [A Rec. Mode] menu appears. Use the four-way controller (23) to select [Sharpness]. Use the four-way controller (45) to change the sharpness level. F G H Soft Normal Sharp Rec. Mode Memory Green Button Sharpness Saturation Contrast Vertical Snap MENU Exit 3/4 4 Press the 3 button. The camera returns to capture status. If you change the [Sharpness] setting frequently, you can save time by assigning it to the Green button (p. 121). Setting the Color Saturation (Saturation) You can set the color saturation. 1 2 3 Press the 3 button in A mode. The [A Rec. [. . . ] 112 9 Appendix N Natural Skin Tone Mode . . . . 83 253 Provided software . . . . . . . . . . . . 206 PTP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]