User manual PENTAX OPTIO H90

[. . . ] Digital Camera Operating Manual To ensure the best performance from your camera, please read the Operating Manual before using the camera. Thank you for purchasing this PENTAX Digital Camera. Please read this manual before using the camera in order to get the most out of all the features and functions. Keep this manual safe, as it can be a valuable tool in helping you to understand all the camera's capabilities. Regarding copyrights Images taken using the PENTAX Digital Camera that are for anything other than personal enjoyment cannot be used without permission according to the rights as specified in the Copyright Act. Please take care, as there are cases where limitations are placed on taking pictures even for personal enjoyment during demonstrations, performances or of items on display. [. . . ] Light Manual · Set another white balance if you are not satisfied with the color balance of pictures taken with the white balance set to F. · Depending on the selected shooting mode, the white balance setting may not be changed. Refer to "Functions Available for Each Shooting Mode" (p. 224) for details. 1 2 3 4 Press the 3 button in A mode. The [A Rec. Mode] menu appears. Use the four-way controller (23) to select [White Balance]. Press the four-way controller (5). The [White Balance] screen appears. Use the four-way controller (23) to change the setting. You can check the result of selected white balance setting on the preview image each time you press the four-way controller (23). White Balance Auto 3 Taking Pictures MENU Cancel OK OK 5 6 Press the 4 button. The setting is saved. Press the 3 button. The camera returns to capture status. Refer to the section "To Set the White Balance Manually" for instructions on adjusting the white balance manually. If you change the [White Balance] setting frequently, you can save time by assigning it to the Green button (p. 119). Saving the White Balance setting 1p. 125 109 To Set the White Balance Manually Have a blank sheet of white paper or similar material ready. 1 2 3 Taking Pictures 110 In the [White Balance] screen, use the four-way controller (23) to select K (Manual). Point the camera at the blank sheet of paper or other material so that it fills the frame displayed in the center of the screen. White Balance SHUTTER Adjust OK MENU Cancel OK 3 4 5 Press the shutter release button fully. The white balance is automatically adjusted. Press the 4 button. The setting is saved and the [A Rec. Mode] menu reappears. Press the 3 button. The camera returns to capture status. Setting the AE Metering You can set the area of the screen where the brightness is metered to determine the exposure. L M N Multi-segment metering Center-weighted metering Spot AE metering The camera divides the image into 256 areas, meters the brightness and determines the exposure. The camera takes a reading of the overall brightness of the picture with the center of the image having more influence on the exposure. The camera determines the exposure by metering the brightness only at the center of the image. 1 Press the 3 button in A mode. The [A Rec. Mode] menu appears. 2 3 4 Use the four-way controller (23) to select [AE Metering]. Press the four-way controller (5). A pull-down menu appears. Use the four-way controller (23) to select the AE Metering setting. Rec. Mode 1/3 Recorded Pixels 12M White Balance AWB Focusing Area AE Metering Sensitivity Auto EV Compensation 0. 0 MENU Cancel OK OK 3 Taking Pictures 5 6 Press the 4 button. The setting is saved. Press the 3 button. The camera returns to capture status. · When the shutter release button is pressed halfway, the brightness is metered and the exposure is determined. · When the subject is outside the focusing area and you want to use N (Spot AE metering), aim the camera at the subject and press the shutter release button halfway to lock the exposure, then compose your picture again and press the shutter release button fully. · Depending on the selected shooting mode, the AE metering setting may not be changed. Refer to "Functions Available for Each Shooting Mode" (p. 224) for details. · If you change the [AE Metering] setting frequently, you can save time by assigning it to the Green button (p. 119). Saving the AE Metering setting 1p. 125 111 Setting the Sensitivity You can select the sensitivity to suit the brightness of the surroundings. Auto The sensitivity is automatically adjusted by the camera. (Sensitivity 80 - 800) 80 The lower the sensitivity, the less noise that affects the image. The 100 shutter speed will be slower in low light conditions. 200 400 800 1600 Higher sensitivity settings use faster shutter speeds in low light 3200 conditions to reduce camera shake, but the image may be affected by noise. [. . . ] 124 MSC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206 Multi-segment metering L . . . . . . . . . . . . . . . . . . . . . 110 9 Appendix N Natural Skin Tone Mode . . . . 80 Night Scene Portrait Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]