User manual PENTAX OPTIO I-10

[. . . ] Digital Camera Operating Manual To ensure the best performance from your camera, please read the Operating Manual before using the camera. Thank you for purchasing this PENTAX Digital Camera. Please read this manual before using the camera in order to get the most out of all the features and functions. Keep this manual safe, as it can be a valuable tool in helping you to understand all the camera's capabilities. Regarding copyrights Images taken using the PENTAX Digital Camera that are for anything other than personal enjoyment cannot be used without permission according to the rights as specified in the Copyright Act. Please take care, as there are cases where limitations are placed on taking pictures even for personal enjoyment during demonstrations, performances or of items on display. [. . . ] Mode Movie D-Range Setting Shake Reduction Blink Detection Digital Zoom Instant Review MENU 2/3 Exit 4 Press the 3 button. The camera returns to capture status. [Shake Reduction] is fixed to O (On) in 9 (Green) mode. The camera shake reduction function may not work properly when, for example, the shutter speed is slower, such as when capturing night scenes. In such cases, we recommend that you set [Shake Reduction] to P (Off) and use a tripod or other support. Setting the Instant Review Use this setting to specify whether or not an Instant Review is displayed immediately after images are shot. The default setting is O (On). 1 2 3 Press the 3 button in A mode. The [A Rec. Mode] menu appears. Use the four-way controller (23) to select [Instant Review]. Use the four-way controller (45) to select O or P. O P Instant Review is displayed. Instant Review is not displayed. 3 Rec. Mode Movie D-Range Setting Shake Reduction Blink Detection Digital Zoom Instant Review MENU 2/3 Taking Pictures Exit 4 Press the 3 button. The camera returns to capture status. Instant Review 1p. 67 If the Blink Detection function worked when shooting, the message [Closed eyes have been detected] appears for 3 seconds during Instant Review. Setting the Image Sharpness (Sharpness) You can give the image sharp or soft outlines. 1 2 Press the 3 button in A mode. The [A Rec. Mode] menu appears. Use the four-way controller (23) to select [Sharpness]. 117 3 Use the four-way controller (45) to change the sharpness level. F G H Soft Normal Sharp Rec. Mode Memory Green Button Sharpness Saturation Contrast Date Imprint MENU 3/3 Off Exit 4 3 Taking Pictures 118 Press the 3 button. The camera returns to capture status. If you change the [Sharpness] setting frequently, you can save time by assigning it to the Green button (p. 120). Setting the Color Saturation (Saturation) You can set the color saturation. 1 2 3 Press the 3 button in A mode. The [A Rec. Mode] menu appears. Use the four-way controller (23) to select [Saturation]. Use the four-way controller (45) to change the saturation level. F G H Low Normal High Rec. Mode Memory Green Button Sharpness Saturation Contrast Date Imprint MENU 3/3 Off Exit 4 Press the 3 button. The camera returns to capture status. If you change the [Saturation] setting frequently, you can save time by assigning it to the Green button (p. 120). Setting the Image Contrast (Contrast) You can set the image contrast level. 1 2 3 Press the 3 button in A mode. The [A Rec. Mode] menu appears. Use the four-way controller (23) to select [Contrast]. Use the four-way controller (45) to change the contrast level. F G H Low Normal High Rec. Mode Memory Green Button Sharpness Saturation Contrast Date Imprint MENU 3/3 3 Taking Pictures Off Exit 4 Press the 3 button. The camera returns to capture status. If you change the [Contrast] setting frequently, you can save time by assigning it to the Green button (p. 120). Setting the Date Imprint Function You can choose whether to imprint the date and/or time when taking still pictures. 1 2 3 Press the 3 button in A mode. The [A Rec. Mode] menu appears. Use the four-way controller (23) to select [Date Imprint]. Press the four-way controller (5). A pull-down menu appears. 119 4 Use the four-way controller (23) to select the Date Imprint details. Choose from [Date], [Date & Time], [Time] or [Off]. Rec. Mode Memory Green Button Sharpness Saturation Contrast Date Imprint MENU 3/3 Date Date & Time Time Off OK Cancel OK 5 3 Taking Pictures · · · · · · · 120 Press the 4 button. The setting is saved. 6 Press the 3 button. The camera returns to capture status. · The date and/or time imprinted with the Date Imprint function cannot be deleted. · Note that if the printer or the image editing software is set to print the date and the images to be printed already have the date and/or time imprinted, the imprinted dates and/or times may overlap. · O appears on the display in A mode when [Date Imprint] is set. · The date and/or time are imprinted on the picture with the display style set in the [Date Adjustment] screen (p. 47). Calling Up a Specific Function You can assign a function to the Green button and recall it quickly by simply pressing the Green button. This is useful for going straight to the setting screens of frequently used functions. [. . . ] 126 MSC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220 Multi-segment metering L . . . . . . . . . . . . . . . . . . . . . 112 9 Appendix N Natural Skin Tone Mode . . . . 120 Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]