User manual PENTAX OPTIO WS80

[. . . ] Digital Camera Operating Manual To ensure the best performance from your camera, please read the Operating Manual before using the camera. Thank you for purchasing this PENTAX Digital Camera. Please read this manual before using the camera in order to get the most out of all the features and functions. Keep this manual safe, as it can be a valuable tool in helping you to understand all the camera's capabilities. Regarding copyrights Images taken using the PENTAX Digital Camera that are for anything other than personal enjoyment cannot be used without permission according to the rights as specified in the Copyright Act. Please take care, as there are cases where limitations are placed on taking pictures even for personal enjoyment during demonstrations, performances or of items on display. [. . . ] Press the 3 button twice. The camera returns to capture status. The D-Range Setting icon appears on the display. 38 P Q O When [Highlight Correction] is set to O When [Shadow Correction] is set to O When [Highlight Correction] and [Shadow Correction] are set to O 08/08/2009 14:25 113 · When [Highlight Correction] is set to O, the minimum sensitivity becomes 2× the minimum sensitivity available for this camera. · If you change the [Highlight Correction] or [Shadow Correction] setting frequently, you can save time by assigning it to the Green button (p. 124). Adjusting the White Balance 3 Taking Pictures 114 You can take pictures in natural colors by adjusting the white balance according to the light conditions at the time of shooting. F Auto The camera adjusts the white balance automatically. Use this mode when taking pictures outside in sunlight. Use this mode when taking pictures outside in the shade. Use this mode when taking pictures under electric or other tungsten light. Use this mode when taking pictures under fluorescent light. Use this mode when adjusting the white balance manually. Light Manual G H I J K · Set another white balance if you are not satisfied with the color balance of pictures taken with the white balance set to F. · Depending on the selected shooting mode, the white balance setting may not be changed. Refer to "Functions Available for Each Shooting Mode" (p. 234) for details. 1 2 3 Press the 3 button in A mode. The [A Rec. Mode] menu appears. Use the four-way controller (23) to select [White Balance]. Press the four-way controller (5). The [White Balance] screen appears. 4 Use the four-way controller (23) to change the setting. You can check the results of selected white balance settings on the preview image each time you press the four-way controller (23). White Balance Auto MENU Cancel OK OK 5 6 Press the 4 button. The setting is saved. Press the 3 button. The camera returns to capture status. If you change the [White Balance] setting frequently, you can save time by assigning it to the Green button (p. 124). Saving the White Balance setting 1p. 133 3 Taking Pictures To Set the White Balance Manually Have a blank sheet of white paper or similar material ready. 1 2 In the [White Balance] screen, use the four-way controller (23) to select K (Manual). Point the camera at the blank sheet of paper or other material so that it fills the frame displayed in the center of the screen. White Balance SHUTTER Adjust OK MENU Cancel OK 3 Press the shutter release button fully. The white balance is automatically adjusted. 115 4 5 Press the 4 button. The setting is saved and the [A Rec. Mode] menu reappears. Press the 3 button. The camera returns to capture status. Setting the AE Metering 3 Taking Pictures 116 You can set the area of the screen where the brightness is metered to determine the exposure. L M N Multi-segment metering Center-weighted metering Spot AE metering The camera divides the image into 256 areas, meters the brightness and determines the exposure. The camera takes a reading of the overall brightness of the picture with the center of the image having more influence on the exposure. The camera determines the exposure by metering the brightness only at the center of the image. 1 2 3 4 Press the 3 button in A mode. The [A Rec. Mode] menu appears. Use the four-way controller (23) to select [AE Metering]. Press the four-way controller (5). A pull-down menu appears. Use the four-way controller (23) to select the AE Metering setting. Rec. Mode 1/4 Pixel Track SR Recorded Pixels 10M White Balance AWB Focusing Area AE Metering Sensitivity MENU Cancel OK OK 5 6 Press the 4 button. The setting is saved. Press the 3 button. The camera returns to capture status. · When the shutter release button is pressed halfway, the brightness is metered and the exposure is determined. · When the subject is outside the focusing area and you want to use N (Spot AE metering), aim the camera at the subject and press the shutter release button halfway to lock the exposure, then compose your picture again and press the shutter release button fully. [. . . ] 219 Multi-segment metering L . . . . . . . . . . . . . . . . . . . . . 116 9 Appendix 258 Program Mode . . . . . . . . . . . . . . . . . . . 212 PTP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124 Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]