User manual PENTAX PC 50

[. . . ] for PENTAX> (6 languages: English, French, German, Spanish, Italian, Japanese) <ACDSee for PENTAX and ACD photostitcher> (6 languages: English, French, German, Spanish, Italian, Japanese) : Mac OS 9. 2 or later (requires QuickTime 6 or higher and the latest version of CarbonLib) · CPU : PowerPC 266MHz or higher · Memory : 8MB minimum · Hard Disk space : 6MB minimum · OS Macintosh · ACDSee for PENTAX (Image viewing software) ACD photostitcher (Panorama image editing software) You are recommended to use an AC adapter connected to a power outlet when connecting the camera to a computer. If the battery runs out of power while images are being transmitted to the computer, the image data may be lost or damaged. When using an AC adapter, make sure that the AC plug cord is properly connected to the camera. Step 5 on reverse side Step 5 on reverse side · OS · CPU · · · · · · Connect the camera and your PC, and transfer images. Connect the camera and your Macintosh, and transfer images. : Windows 98SE/Me/NT/2000/XP (Home Edition/Professional) : Pentium III 500MHz or higher (Pentium4 2. 0GHz or higher recommended) Memory : 128MB minimum (512MB or higher recommended) Hard Disk space : 50MB minimum Internet Explorer 5. 0 or later QuickTime 6 or later Windows Media Player 7. 1 or later DirectX 9. 0 or later The classic system is necessary when using ACD photostitcher with Mac OS X or higher. Operation is not guaranteed on all PCs meeting the system requirements. Enjoy viewing and editing images transferred to your computer with the image processing software (ACDSee for PENTAX). For details, see the "ACDSee for PENTAX User Guide" supplied with the software. 57561 02-200509 Printed in China Windows Step 2 Installing the USB Driver Windows 98/98SE only 1 2 3 Two drivers (PENSSTOR. INF and PENSPDR. INF) must be installed before using the USB cable to connect the camera to a computer running Windows 98/98SE. 8 Windows Confirm that [PENSSTOR. INF] is displayed and click [Next]. Installation of the driver starts. Step 3 Installing the Software Installing the Image Processing Software (ACDSee for PENTAX 2. 0) This section describes the procedures for installing ACDSee for PENTAX 2. 0, which lets you view and edit images transferred to your PC. · Windows Media Player 7. 1 or later must be installed in your PC to install ACDSee for PENTAX 2. 0. [. . . ] Reboot your PC after installation is finished (Other settings are not necessary during installation). 9 Click [Finish]. When installation is finished, installation of the driver for the new hardware starts. Turn your PC on. Insert the CD-ROM (S-SW30) into the CD-ROM drive. The PENTAX Software Installer screen appears automatically, but no action is required at this stage. Click the (Close) button to exit the screen. With your camera turned off, connect to your PC using the USB cable. 4 10 Click [Next]. 1 2 11 Select [Search for the best driver for your device] Turn your PC on. Insert the CD-ROM (S-SW30) into the CD-ROM drive. The PENTAX Software Installer screen appears. · If the PENTAX Software Installer screen does not appear Display the PENTAX Software Installer screen following the steps below. 1) Double-click [My Computer] on the desktop. 2) Double-click the [CD-ROM drive (S-SW30)] icon. 3) Double-click [Setup. exe]. If QuickTime and DirectX are not installed in your PC, a message such as the one shown on the right appears when ACDSee for PENTAX 2. 0 is run. Click [Close] and install QuickTime and DirectX from the [PENTAX Software Installer] screen. If QuickTime and DirectX are not installed in your PC, operation of ACDSee for PENTAX 2. 0 is not guaranteed. If your PC is running Windows Media Player earlier than version 7. 1, a message such as the one shown on the right may appear during installation. A new unformatted SD Memory Card may show the manufacturer name or model number. 1 2 3 4 5 Turn your Macintosh on. Insert the CD-ROM (S-SW30) in the CD-ROM drive. Double-click the [Install ACDSee] icon. The PENTAX Software Installer screen appears. Double-click the [Master Installer] icon to display the PENTAX Software Installer screen. Installing ACD photostitcher This section describes the procedures for installing ACD photostitcher, a software application that lets you join a number of images together to form a panorama picture. You can choose the languages from the displayed screen. A selection screen to install your desired software appears. 1 Click [ACD photostitcher]. The licensing agreement appears on the screen. After reading it, click [Agree] to accept the terms of the agreement. Windows Step 5 7 Double-click the [DCIM] folder. Images are stored in folder [xxxPENTX], where "xxx" is a threedigit folder number. When [Folder Name] on the [u Setting] menu is set to [Date], folders are displayed with a folder name indicating the date the images were taken. Images taken on September 25, for example, are stored in folder [xxx_0925]. Transferring Images to a Windows PC When the digital camera is connected to your Windows PC and the camera is turned on, the PC automatically recognizes the camera and begins transferring images. If the digital camera is connected to your PC in [PictBridge] USB Connection mode, the images cannot be transferred. Disconnect the USB cable from your camera and PC, follow the instructions in "Setting Up Your Digital Camera" to set the USB Connection mode to [PC], and then reconnect the USB cable. 6 Click your applicable Mac OS. The software selection screen appears. 2 Select [Install Location] and click [Install]. Installation starts. When the message appears telling you that the software has been successfully installed, click [Quit]. 8 Select the folders you want to copy to the PC. Hold the [Ctrl] key on the keyboard while clicking on the folders in which the images you want to copy are stored. Select folders Connecting the Camera and PC 1 2 Turn your PC on. With your camera turned off, connect to your PC using the USB cable. If there is no SD Memory Card in the camera, the images stored in the built-in memory will be transmitted to your PC. 9 Select [Copy To Folder. . . ] from the [Edit] menu. The Copy Files screen appears. 7 Click [ACDSeeTM]. The setup screen appears. Follow the on-screen guidance to input registration information and install the software. 3 10 Specify the destination folder. [. . . ] Follow the on-screen guidance to input registration information and install the software. 3 10 Specify the destination folder. 11 Click [OK]. The image is copied to the PC. 2 Disconnecting the Camera from Your PC 3 Turn your camera on. The Device Detector screen appears automatically. If the Device Detector screen does not appear, display and copy the images following the steps in "When the Device Detector screen does not appear". The drive name can be changed. 3 8 Click [Finish]. The ACDSee for PENTAX 2. 0 Browser starts. Select [USB Mass Storage Device] and click [OK]. A message appears indicating that the hardware can be safely removed. · If the SD Memory Card has a volume label, the volume label name appears instead of [untitled]. [. . . ]