User manual PENTAX PDC6345

[. . . ] FCC STATEMENT (For customers in USA) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] Use or to select aperture/shutter speed item. Adjust the value with or , and press the button. Compose your subject within the focus frame. Press the shutter button to capture the image. Select: Av/Tv F2. 8 2s OK : Press the shuter button halfway to confirm if the exposure is set correctly on the LCD monitor. EN-34 ADVANCED SHOOTING High Speed Continuous This mode is used for continuous shooting. 3 pictures are taken continuously once the shutter button is pressed. Rotate the mode dial to camera on by pressing the button. Press the MENU button, then use to select the [Mode2] menu. Use to select [Drive Mode], then press the Mode1 Mode2 Mode3 AE Metering Drive Mode Digital Zoom Instant Review OK: Exit : On Off 2/4 4. Use or to select [HS Continuous], then press the 5. To exit the menu, press the MENU button. button. Drive Mode Standard HS Continuous Auto Bracket The indicator is displayed on the monitor screen. Press the shutter button halfway to lock the focus. Press the shutter button to capture a sequence of images. OK : Exit : 2/3 In High Speed Continuous mode, the flash mode will be set to OFF automatically. EN-35 Auto Bracket In this mode, the camera automatically changes the exposure within a set range to take three shots after you press the shutter button once. Auto Bracket settings can be combined with exposure compensation settings to extend the adjustment range. Rotate the mode dial to , camera on by pressing the button. Press the MENU button, then use to select the [Mode2] menu. Use to select [Drive Mode], then press the button. Use or to select [Auto Bracket], then press the button. To exit the menu, press the MENU button. indicator is displayed on the monitor screen. Press the shutter button to capture the three images. Drive Mode Standard HS Continuous Auto Bracket OK : Exit : 3/3 In Auto Bracket mode, the flash mode will be set to OFF automatically. EN-36 Selecting the Metering Mode You can select the metering mode that sets which part of the subject to measure to determine the exposure. Press the MENU button, then use to select the [Mode2] menu. Use to select [AE Metering], then press the Mode1 Mode2 Mode3 AE Metering Drive Mode Digital Zoom Instant Review OK: Exit : On Off 1/4 4. [. . . ] EN-76 If your PENTAX was purchased outside of the country where you wish to have it serviced during the warranty period, regular handling and servicing fees may be charged by the manufacturer's representatives in that country. Notwithstanding this, your PENTAX returned to the manufacturer will be serviced free of charge according to this procedure and warranty policy. In any case, however, shipping charges and customs clearance fees to be borne by the sender. To prove the date of your purchase when required, please keep the receipt or bills covering the purchase of your equipment for at least a year. [. . . ]