User manual PENTAX SMC REFLEX 1000MM F11

[. . . ] Images taken with the purpose of obtaining copyrights also cannot be used outside the scope of use of the copyright as laid out in the Copyright Act, and care should be taken here also. Regarding trademarks · CompactFlash and CF are trademarks of SanDisk Corporation. · PENTAX is a trademark of Asahi Optical Co. , Ltd. · All other brands or product names are trademarks or registered trademarks of their respective companies. · The USB driver uses software developed by Phoenix Technologies Ltd. [. . . ] Use the four-way controller ( ) to change the size. The camera is ready to take the picture. 44 Taking Pictures Rec. Mode Memory Set-up Resolution Quality Level White Balance Focusing Area Digital Zoom 2048×1536 Auto Wide On 1/3 MENU Exit OK Ok Selecting the Quality Levels You can choose the image compression rate. Better Best Good Standard level The quality is good and there is a high volume of image data. The quality is poor and there is a low volume of image data. Taking Pictures z x c Select [Quality Level] from the [Rec. Mode] menu. ) to change the image Press the OK button. The camera is ready to take the picture. 45 How to recall the [Rec. Mode] menu ( ) Rec. Mode Memory Set-up Menu button Four-way controller OK button Resolution Quality Level White Balance Focusing Area Digital Zoom 2048×1536 Auto Wide On 1/3 MENU Exit OK Ok Adjusting the Color Balance according to Lighting (White Balance) You can take pictures in the appropriate colors by setting the white balance according to the light conditions. Auto/AUTO Auto The camera adjusts the white balance automatically. Use this mode when taking pictures outside in sunlight. Use this mode when taking pictures outside in the shade. Use this mode when taking subjects under elec tric or other tungsten light. Use this mode when taking subjects under flu orescent light. Use this mode when taking pictures by adjusting the white balance manually. 46 Taking Pictures Manual/ Daylight Shade Tungsten Light Fluorescent Light Manual z x c v Select [White Balance] from the [Rec. Mode] menu. Press the four-way controller ( The white balance screen will be displayed. The camera is ready to take the picture. p. 52 Saving the AE Metering Method Setting the ISO Speed (ISO Speed) Auto/AUTO The camera sets the speed automatically. 100 200 Increases the exposure time Decreases the exposure time z x c Select [ISO Speed] on the [Rec. Mode] menu. ) to change the ISO Press the OK button. The camera is ready to take the picture. p. 52 Saving the ISO Speed 49 How to recall the [Rec. Mode] menu ( ) Rec. Mode Memory Set-up Menu button Four-way controller OK button Resolution Quality Level White Balance Focusing Area Digital Zoom 2048×1536 Auto Wide On 1/3 MENU Exit OK Ok Selecting the Color Mode (Color) Full B&W Sepia The picture is taken in color The picture is taken in black and white. The picture is taken in sepia. 50 Taking Pictures z x c v Select [Color] on the [Rec. Mode] menu. Use the four-way controller ( ) to change the setting. The camera is ready to take the picture. Setting the Instant Review Time (Instant Review) You can choose the Instant Review time from 0. 5sec, 1sec, 2sec, 3sec, 4sec, 5sec or Off (no display). z x c Select [Instant Review] on the [Rec. Mode] menu. ) to change the display Press the OK button. The camera is ready to take the picture. (6 times) Rec. Mode Memory Set-up (5 times) Rec. Mode Memory Set-up AE Metering ISO Speed Color Instant Review Sharpness Auto Full 0. 5sec Normal Saturation Contrast Normal Normal 2/3 MENU Exit OK Ok 3/3 MENU Exit OK Ok Setting the Sharpness (Sharpness) You can choose whether you want the image to have sharp or soft outlines. z x c Select [Sharpness] on the [Rec. Mode] menu. [. . . ] Notwithstanding this, your Pentax returned to the manufacturer will be serviced free of charge according to this procedure and warranty policy. In any case, however, shipping charges and customs clearance fees to be borne by the sender. To prove the date of your purchase when required, please keep the receipt or bills covering the purchase of your equipment for at least a year. Before sending your equipment for servicing, please make sure that you are sending it to the manufacturer's authorized representatives or their approved repair shops, unless you are sending it directly to the manufacturer. [. . . ]