User manual PENTAX Z-70

[. . . ] Images taken with the purpose of obtaining copyrights also cannot be used outside the scope of use of the copyright as laid out in the Copyright Act, and care should be taken here also. Warning These symbols indicate that it is possible that the user may experience serious difficulties if the warnings are not heeded. These symbols indicate that it is possible that the user may experience minor or middling difficulties or physical difficulties if the warnings are not heeded. Caution Regarding trademarks · · · · · CompactFlash and CF are trademarks of SanDisk Corporation. PENTAX is a trademark of Asahi Optical Co. , Ltd. Optio is a trademark of Asahi Optical Co. , Ltd. [. . . ] The camera is ready to take the picture in the set flash mode. Changing the Aperture Setting See "Taking Pictures Manually (Manual Exposure Mode)" (p. 32). 42 Saving the Flash Mode p. 52 43 How to recall the [Rec. Mode] menu ( ) Rec. Mode Memory Set-up Rec. Mode Memory Set-up Menu button Four-way controller OK button Resolution Quality Level White Balance Focusing Area Digital Zoom 2240×1680 Auto Wide On Resolution Quality Level White Balance Focusing Area Digital Zoom 2240×1680 Auto Wide On 1/3 MENU Exit OK Ok 1/3 MENU Exit OK Ok Selecting the Recorded Pixels You can choose the size of recorded pixels from [2240 × 1680], [1120 × 840] and [640 × 480]. Selecting the Quality Levels You can choose the image compression rate. Better Standard level The quality is the best and there is a high volume of image data. The quality is good and there is a low volume of image data. z x c Select [Resolution] from the [Rec. Mode] menu. Use the four-way controller ( ) to change the size. The camera is ready to take the picture. Best Good Taking Pictures 44 Taking Pictures z x c Select [Quality Level] from the [Rec. Mode] menu. ) to change the image Press the OK button. The camera is ready to take the picture. 45 How to recall the [Rec. Mode] menu ( ) Rec. Mode Memory Set-up Rec. Mode Memory Set-up Menu button Four-way controller OK button Resolution Quality Level White Balance Focusing Area Digital Zoom 2240×1680 Auto Wide On Resolution Quality Level White Balance Focusing Area Digital Zoom 2240×1680 Auto Wide On 1/3 MENU Exit OK Ok 1/3 MENU Exit OK Ok Adjusting the Color Balance according to Lighting (White Balance) You can take pictures in the appropriate colors by setting the white balance according to the light conditions. Auto Auto Daylight Shade Tungsten Light Fluorescent Light Manual Manual The camera adjusts the white balance automatically. Use this mode when taking pictures outside in sunlight. Use this mode when taking pictures outside in the shade. Use this mode when taking subjects under electric or other tungsten light. Use this mode when taking subjects under fluorescent light. p. 52 Setting the ISO Speed (ISO Speed) Auto 100 200 OK The camera sets the speed automatically. Increases the exposure time Decreases the exposure time Ok Saving the Focusing Area z x c Select [ISO Speed] on the [Rec. Mode] menu. ) to change the ISO At certain autofocus areas, the focus frame may overlap the mode or other icons and become unclear. In such a case, turn off the DISPLAY mode. (See page 30. ) If you have changed an autofocus area, you can not check the location through the viewfinder. Take pictures checking the location on the LCD monitor. Press the OK button. The camera is ready to take the picture. p. 52 49 Saving the ISO Speed How to recall the [Rec. Mode] menu ( ) Rec. Mode Memory Set-up (6 times) Rec. Mode Memory Set-up (5 times) Rec. Mode Memory Set-up Menu button Four-way controller OK button Resolution Quality Level White Balance Focusing Area Digital Zoom 2240×1680 Auto Wide On AE Metering ISO Speed Color Instant Review Sharpness Auto Full 0. 5sec Normal Saturation Contrast Normal Normal 1/3 MENU Exit OK Ok 2/3 MENU Exit OK Ok 3/3 MENU Exit OK Ok Selecting the Color Mode (Color) Full B&W Sepia The picture is taken in color The picture is taken in black and white. The picture is taken in sepia. Setting the Sharpness (Sharpness) You can choose whether you want the image to have sharp or soft outlines. z x c Select [Sharpness] on the [Rec. Mode] menu. Use the four-way controller ( ) to change the setting from [Normal] to [Soft] to [Hard]. The camera is ready to take the picture. [. . . ] Notwithstanding this, your Pentax returned to the manufacturer will be serviced free of charge according to this procedure and warranty policy. In any case, however, shipping charges and customs clearance fees to be borne by the sender. To prove the date of your purchase when required, please keep the receipt or bills covering the purchase of your equipment for at least a year. Before sending your equipment for servicing, please make sure that you are sending it to the manufacturer's authorized representatives or their approved repair shops, unless you are sending it directly to the manufacturer. [. . . ]