User manual PFAFF SMART 200C

[. . . ] OWNER'S MANUAL 200 c SYMBOL INSTRUCTIONS Raise needle Raise presser foot Lower presser foot This houshold sewing machine is designed to comply with IEC/EN 60335-2-28 and UL1594 IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic safety precautions should always be followed, including the following: Read all instructions before using this household sewing machine. DANGER - To reduce the risk of electric shock: · · A sewing machine should never be left unattended when plugged in. Always unplug this sewing machine from the electric outlet immediately after using and before cleaning. Replace bulb with same type rated 5 Watt. WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons: · · · · · · · · · · · · · · · Do not allow to be used as a toy. Close attention is necessary when this sewing machine is used by or near children or infirm person. [. . . ] When you press the button so that the arrow points down " ", the machine will stop with the needle in the lowest position. 27 FUNCTION BUTTONS Stitch width button Stitch length button Mirroring button Mode selection button Stitch width button When you select a stitch, the machine will automatically set the recommended stitch width, which will be indicated by numbers on the LCD screen. The stitch width can be changed by pressing the stitch width adjustment buttons. For a narrower stitch, press the "-" button (left). For a wider stitch, press the "+" button (right). The stitch width can be adjusted between "0. 0-7. 0". Some stitches have a limited stitch width. When patterns 01-05 are selected, the needle position is changed by the stitch width adjustment buttons. Pressing the "- " button (left), will move the needle to the left and pressing the "+" button (right), will move the needle to the right. The numbers will be changed from left position "0. 0" to extreme right position "7. 0". The pre-set center needle position will be indicated as "3. 5". 28 Stitch length button When you select a stitch the machine will automatically set the recommended stitch length which will be indicated by numbers on the LCD screen. The stitch length can be adjusted by pressing the stitch length adjustment buttons. To shorten the stitch length, press the "-" button (left). For a longer stitch length, press the "+" button (right). The stitch length can be adjusted between "0. 0-4. 5". Some stitches have a limited length. MODE selection button When you turn the machine "ON" the LCD screen display will be set to direct mode " ". Press the " " button to switch to patterns mode, " ". If you press the function button again, the alphabet mode will be displayed " ". After a third press the machine will go back to direct mode " ". Utility and decorative pattern mode: Stitch selection using number buttons. Block letter mode: Character selection using number buttons. 29 Pattern mirroring button The patterns 01-16, 32-60 can be mirrored by pressing the " " button. The LCD will display the mirroring function and the machine will continue to sew the mirrored pattern until the mirroring function is cancelled by pressing the mirror button again. When the mirroring function disappears from the LCD screen, the machine will start sewing the normal stitch. If you change the pattern, the mirroring function will be cancelled accordingly. Press the mirror button again if you want the new pattern to be mirrored. 30 MEMORY BUTTONS Clear button Arrow button Memory button Memory button Press the " " button to enter the memory mode and program combinations of characters or decorative stitches. Press the " " button again to leave the memory mode and return to direct mode. [. . . ] 5. Use the screwdriver to firmly tighten the screw. 6. Attach the presser foot that is appropriate for the type of stitch that you wish to sew. 2. Thread the bobbin case as illustrated. 3. The needle size must suit the fabric and thread. [. . . ]