User manual PFAFF STITCH CREATOR

[. . . ] Note: If sewing mode is active and your programmed stitch is ready to be sewn, you can also close the active function by pressing the foot control, or by pressing the start/stop button. Some stitches cannot be used with Stitch Creator. [. . . ] If zooming out, only the edge lines of the stitch field will be visible. Select stitches/stitch points To select a stitch point, just touch it on screen with your stylus. If selecting more than one stitch point, the stitches in between will automatically be selected as well. To mark the previous or next stitch point in your stitch, use the arrows (12). Between the arrows is information about the stitch or combination shown. The first number is the marked stitch point. The second number is the total number of stitch points. 10 11 12 Multi-select (11) Long touch the multi-select icon to select all stitch points at the same time. To select the stitch points next to the marked stitch point, touch the multi-select icon and then touch the arrows (12) to select the next stitch point. Use the up arrow to select stitch points before the marked stitch point and the down arrow to select the stitch points after the marked stitch point. Note: If selecting stitch points using the up arrow, you can deselect them by touching the down arrow. Stitch Creator 6:4 Touch functions Use your stylus to make changes directly on screen by touching and dragging in the stitch field. You can pan and move depending on which touch function is activated. You can also use the arrows in the wheel to make minor adjustments. Move (13) You can move the selected stitch or stitch points using your stylus on the screen or touch the arrows in the wheel (15). [. . . ] If a sequence or stitch is selected and you re-open Stitch Creator from embroidery mode, the stitch will remain unchanged. If no stitch is selected, Stitch Creator will be empty, ready to create something new. [. . . ]