User manual PHILIPS 107E4199

[. . . ] electronic user's manual file:///D|/Rita/LF3/lf3manual/english/107E/manual. html [2002/7/7 ??11:03:58] Safety & Troubleshooting Safety and Troubleshooting Information Safety Precautions and Maintenance · Troubleshooting · Regulatory Information · Other Related Information Safety precautions and maintenance WARNING: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards. Read and follow these instructions when connecting and using your computer monitor: q Disconnect the monitor from the power supply if the monitor is not to be used for an extended period of time. q q q q q Do not attempt to remove the back cover, as you will be exposed to a shock hazard. The back cover should only be removed by qualified service personnel. Do not place objects on top of the monitor cabinet, objects could fall into vents or cover them and prevent proper cooling of the monitor's electronic devices. [. . . ] Power button on top of the monitor should be in the ON position. Disconnect the monitor from the power outlet for about one minute. Make sure the monitor cable is properly connected to your computer. Check to see if the monitor cable has bent pins. The Energy Saving feature may be activated Make sure the Brightness and Contrast controls are set correctly. Make sure the monitor cable is properly connected to your computer. Check to see if the monitor cable has bent pins. Make sure the computer Power button is on. Make sure the monitor cable is properly connected to your computer. Check to see if the monitor cable has bent pins. If you are using a non-VESA-DDC standard video card, turn the DDC1 / 2B feature Off. Face the monitor toward the East for the best picture quality. Make sure the monitor cable is properly connected to your computer. Check to see if the monitor cable has bent pins. No Picture q (Power LED not lit) q q No Picture (Power LED is yellow) q q q q No Picture (Power LED is green) q q q Screen doesn't show when you turn on the monitor No color or intermittent color Color appears blotchy q q q q q q q q Missing one or more colors q q file:///D|/Rita/LF3/lf3manual/english/107E/SAFETY/saf_troub. htm (1 of 2) [2002/7/7 ??11:04:30] Troubleshooting q Dim Picture Picture is too large or too small. Unstable Picture Problem with On Screen Display q Adjust the Brightness and Contrast controls. Check your video card and it's owner's manual instructions for it may be a non-VESA-DDC Standard card. Adjust the Horizontal and/or Vertical Size. Eliminate the use of a video extension cable and/or video switch box. Face the monitor toward the East for the best picture quality. Check to make sure Moiré is switched off. Refer to the instructions and troubleshooting information in that chapter. q q q q q q q q q For further assistance, refer to the Consumer Information Centers list to contact your local Philips distributor. RETURN TO TOP OF THE PAGE file:///D|/Rita/LF3/lf3manual/english/107E/SAFETY/saf_troub. htm (2 of 2) [2002/7/7 ?? [. . . ] Contact the Philips Customer Care Center phone number listed below for product assistance and procedures for servicing: Philips Customer Care Center (877) 835-1838 or (903) 242-4804 (In U. S. A. , Puerto Rico and U. S. Virgin Islands, all implied warranties, including implied warranties of merchantability and fitness for a particular purpose, are limited in duration to the duration of this express warranty. But, because some states do not allow limitations on how long an implied warranty may last, this limitation may not apply to you. ) TO GET WARRANTY SERVICE IN CANADA. . . Please contact Philips at: (800) 479-6696 Three years free parts and three years free labor will be provided at Philips Canada depot or any one of its authorized service centers. [. . . ]