User manual PHILIPS 107G66

[. . . ] electronic user's manual file:///D|/EDFU/crt_17/edoc/english/107G/manual. html7/21/2004 4:23:04 PM Safety & Troubleshooting Safety and Troubleshooting Information Safety Precautions and Maintenance · Troubleshooting · Regulatory Information · Other Related Information Safety precautions and maintenance WARNING: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards. Read and follow these instructions when connecting and using your computer monitor: q q q q q q Disconnect the monitor from the power supply if the monitor is not to be used for an extended period of time. Do not attempt to remove the back cover, as you will be exposed to a shock hazard. The back cover should only be removed by qualified service personnel. Do not place objects on top of the monitor cabinet, objects could fall into vents or cover them and prevent proper cooling of the monitor's electronic devices. [. . . ] To provide antistatic properties, the coating is impregnated with small conductive particles. ARAS (Anti-Reflection, Anti-Static) coating file:///D|/EDFU/crt_17/edoc/english/GLOSSARY/GLOSSARY. HTM (15 of 22)7/21/2004 4:23:42 PM Glossary ARAS is one of the most effective anti-reflection/anti-static screen treatments currently available. It is composed of a multi-layer structure of transparent dielectric material that suppresses specular reflections by broadband interference effects at the screen surface. Anti-static properties are provided by a single conductive layer within the multi-layer structure. With ARAS, the intensity of reflected light is reduced from around 4. 5% of the incident light (the reflectivity of uncoated screens) to less than 0. 5%. ARAS also has a major advantage over other screen treatments: It doesn't diffuse or scatter reflected light, so picture contrast and sharpness remain completely unimpaired. It's also easy to clean and tough enough to withstand commercially available cleaning agents. The ARAS coating reflects only about 0. 5% of the incident light. AGARAS (Anti-Glare Anti-Reflection Anti-Static) coating. A combined anti-reflection, anti-glare, anti-static coating. Self-test function A monitor equipped with hardware or software to automatically detect cable connection status. Shape Deviation of a reproduced picture from its intended shape. The following types of distortion are most file:///D|/EDFU/crt_17/edoc/english/GLOSSARY/GLOSSARY. HTM (16 of 22)7/21/2004 4:23:42 PM Glossary common: SOG (Synchronization On Green) A properly functioning color monitor requires five kinds of signals: horizontal sync pulse, vertical sync pulse, red color signal, green color signal and blue color signal. Signals from a PC are transmitted to a monitor using one of three methods: 1. Separate sync: Horizontal and Vertical sync signals transmitted separately 2. Composite sync: Horizontal and vertical sync pulses mixed into a single signal train. SOG: Horizontal and vertical sync pulses mixed, then combined with the green color signal. RETURN TO TOP OF THE PAGE file:///D|/EDFU/crt_17/edoc/english/GLOSSARY/GLOSSARY. HTM (17 of 22)7/21/2004 4:23:42 PM Glossary T TCO See Electromagnetic radiation standards. Tilt function See rotation function. Trapezoid distortion See Geometrical distortion. TTL signal A TTL (Transistor-transistor-logic) signal is a digital signal level for controlling the screen colors. With TTL driving, the red, green and blue signals can only be switched on or off or provided with an intensity signal. A TTL-driven monitor can thus display a maximum of 64 colors. Video standards such as MDA, CGA and EGA are based on TTL level. RETURN TO TOP OF THE PAGE U USB or Universal Serial Bus A smart plug for PC peripherals. USB automatically determines resources (like driver software and bus bandwidth) required by peripherals. USB makes necessary resources available without user intervention. file:///D|/EDFU/crt_17/edoc/english/GLOSSARY/GLOSSARY. HTM (18 of 22)7/21/2004 4:23:42 PM Glossary q q q USB eliminates "case angst" -- the fear of removing the computer case to install add-on peripherals. And USB also eliminates adjustment of complicated IRQ settings when installing new peripherals. USB does away with "port gridlock. " Without USB, PCs are normally limited to one printer, two Com port devices (usually a mouse and modem), one Enhanced Parallel Port add-on (scanner or video camera, for example) and a joystick. [. . . ] The MAIN CONTROLS window appears. 2) Press the button until RESET TO FACTORY SETTINGS is highlighted. file:///D|/EDFU/crt_17/edoc/english/OSD_2/osd_cont. htm (18 of 24)7/21/2004 4:24:11 PM The OSD Controls 3) Press the button. The RESET TO FACTORY SETTINGS window appears. 4) Press the or button to select YES or NO. YES returns all settings to their original factory adjustments. 5) Press the button to confirm your selection and press again return to the MAIN CONTROLS window. CLOSE MAIN CONTROLS will be highlighted. RETURN TO TOP OF THE PAGE EXTRA CONTROLS file:///D|/EDFU/crt_17/edoc/english/OSD_2/osd_cont. htm (19 of 24)7/21/2004 4:24:11 PM The OSD Controls DEGAUSS EXTRA CONTROLS is a set of three features, including DEGAUSS. [. . . ]