User manual PHILIPS 13-COMBINATION TV-VCR CCC133AT99

[. . . ] Color TV with built-in VCR Owner's Manual CCC133AT CCC193AT Read this manual first! Congratulations on purchasing this Philips product. We've included everything you need to get started. If you have any problems, Philips Representatives can help you get the most from your new product by explaining: · Hookups, · First Time Setup, and · Feature Operation. Do not attempt to return this product to the store. For fast help, call us first! [. . . ] If not, CLOCK MUST BE SET appears, followed by the SET CLOCK menu. Make sure the tape's record tab is intact and the tape is long enough to record the program. Complete each step within 60 seconds of completing the previous step. If you don't, you may start again at step 1. 2-3 EJECT POWER 1 MENU STATUS/EXIT CLEAR 1 4 7 2 5 8 0 3 6 9 ALT. CH 1 2 SLEEP/ WAKE UP Press the MENU button. REC /OTR PAUSE /STILL PLAY REW F. FWD > PRIM. SETUP PRESS B VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS STOP CH. MUTE VOL. FM SPEED F. ADV Press the PLAY/v button or the STOP/w button to select VCR PROGRAM, then press the F. FWD/B button. VCR PROGRAM > ONCE TRACKING MEMORY SLOW DAILY(MON-FRI) WEEKLY PROGRAM REVIEW SELECT KL CHOOSE B TO END PRESS EXIT 3 Press the PLAY/v button or the STOP/w button to select a ONCE, DAILY, OR WEEKLY recording. q ONCE: The TV/VCR will record a TV program on any day you choose, up to 12 months away. q DAILY: The TV/VCR will record every day from Monday to Friday ­ starting at the same time and recording the same channel for the same length of time. q WEEKLY: The TV/VCR will record the same channel on the same day, at the same time, and for the same length of time every week. Daily Recording (example) DAILY PROGRAM (MON-FRI) PROGRAM -1 2 3 4 5 6 7 8- Helpful Hints · With ShowGuard, you don't have to worry about losing your timer recordings. If the power fails, timer recordings will be restored when the clock is reset. (The clock will reset itself automatically if you are using AUTO CLOCK. If you are not using AUTO CLOCK, reset the clock manually. Details are on pages 12-13. ) The timer recording will not occur only if it was scheduled to take place during the power failure. · You cannot set a timer recording if DEFEAT RECORDING is ON. Details are on page 36. SELECT PROGRAM NUMBER TO END PRESS EXIT Timer Recording (cont'd) 33 4 Use the Number buttons (1-8) to select a position in which to store the timer recording. Flashing numbers indicate an open position (one in which a timer recording has not been stored yet). NOTE: If you select a number that already has been used to store a timer recording, PREVIOUSLY SET PROGRAM will appear on the screen for a few seconds. Then information about the program in that position will appear on the screen. If this happens, press the STATUS/EXIT button. Then use the Number buttons to select another position. 4-7 EJECT POWER MENU STATUS/EXIT CLEAR 1 4 7 SLEEP/ WAKE UP 2 5 8 0 3 6 9 ALT. CH 5 Use the Number buttons to enter the channel of the TV program you want to record. q If you are recording from line input, press 0, 0. [. . . ] Then, when you push the CH(annel) o/p buttons, you only scan through channels you receive. Bands: settings that allow you to tune channels. · Antenna ­ VHF (very high frequency; channels 2-13) and UHF (ultra high frequency; channels 14-69). · Cable ­ all standard channels can be received without a Cable Box. [. . . ]