User manual PHILIPS 14GR1229

[. . . ] . 5 Operation Using the radio (only available on certain versions) . . 13 1 English Installing your television set & Positioning the television set 5 cm " Remote control 5 cm 5 cm Place your TV on a solid, stable surface, leaving a space of at least 5 cm around the appliance. To avoid accidents, do not put anything on the set such as a cloth or cover, a container full of liquid (vase) or a heat source (lamp). The set must not be exposed to water. é Connections Insert the two R6-type batteries (supplied) making sure that they are the right way round. Check that the mode selector is set to TV. [. . . ] If the transmitter or cable network sends the automatic sort signal, the programmes will be numbered correctly. If this is not the case, you need to use the Sort menu to renumber the programmes (see p. Some transmitters or cable networks broadcast their own sort parameters (region, language, etc. ). In this case, indicate your choice using the îÏ keys and validate with ¬. To quit or interrupt the search, press H. If no picture is found, consult the possible solutions (p. ( To quit the menus, press d. Using the radio (only available on certain versions) Choice of TV or radio mode Press the  key on the remote control to switch the TV set to either TV or radio mode. In radio mode, the number, station name (if available) and frequency are displayed on the screen. To enter the station names, use the Name menu (p. 4) Program selection Use the 0 9 or @ P # keys to select the FM stations (from 1 to 40). List of radio stations Press the i key to display the list of radio stations radio. Use the îÏ keys to change station and the d key to exit. The access to the Install menu is also locked. Caution, for encrypted programs using an external decoder, you must lock the corresponding EXT socket. Change code: this allows you to enter a new 4 digit code. Confirm your new code by entering it a second time. If you have forgotten your secret code, enter the universal code 0711 twice. Unlock all: this is used to unlock all locked programmes. Lock All: this is used to lock all the TV programmes and EXT connectors. Press the d key to quit. 7 Teletext Teletext is an information system broadcast by certain channels which can be consulted like a newspaper. It also offers access to subtitles for viewers with hearing problems or who are not familiar with the transmission language (cable networks, satellite channels, etc. ). Press : ¤ You will obtain: Teletext call This is used to call teletext, change to transparent mode and then exit. The summary appears with a list of items that can be accessed. Each item has a corresponding 3 digit page number. [. . . ] The Child Lock function is switched On (p. If the set receives no signal for 15 mins, it automatically goes into standby mode. To save power, your set is fitted with components that give it a very low power consumption when in standby mode (less than 3 W). If your TV set breaks down, never attempt to repair it yourself: contact your dealer's aftersales service. [. . . ]