User manual PHILIPS 14PT1365

[. . . ] Introduction When setting up your television set for the first time, we advise you to use the quick installation guide included below. Please read the following instructions carefully to familiarise yourself with all the features available on your set: Remote control keys . 8 Installing your television set æ Positioning the television set Place your TV on a solid, stable surface, leaving a space of at least 5 cm around the appliance. To avoid accidents, do not put anything on the set such as a cloth or cover, a container full of liquid (vase) or a heat source (lamp). The set must not be exposed to water. Â Connections · Insert the aerial plug into the M socket at the rear of the set. [. . . ] To exit or interrupt the search, press . · EXTERNAL: press to bring up the menu. You have access to a series of names which allow you to customise the names of the external sockets. When you next select an external socket, its chosen name will be displayed for a few seconds. . ® To exit from the menus, press 4 Using other menus To adjust a menu: æ Display the menu. Â Select a setting. ê Adjust. Note: the menus disappear automatically after 30 seconds if no further adjustments are made. To exit from the menus, press (or to come back to the previous stage). Adjusting the picture Press . You can adjust: BRIGHTNESS, COLOUR, CONTRAST, SHARPNESS, TINT, CONTRAST+ and NOISE RED. . · SHARPNESS: alters the crispness of the image, · TINT: alters the colour balance. There are 3 options: COLD (blue tint), NORMAL (balanced) or WARM (red tint). · CONTRAST+: automatically adjusts the image contrast according to content (the darkest part of the image is always black). · NOISE RED. : alleviates fuzziness (snowy picture). This setting is useful when reception is difficult. Adjusting the sound Press . You can adjust DELTA VOL. · DELTA VOLUME (volume difference): allows you to compensate for the volume differences between the different programmes or the EXT sockets. This setting is available for programmes 1 - 40 and the EXT sockets. Storing settings You can store your own sound and picture settings. Values are saved under PERSONAL in the Smart sound and picture controls ( and ) Note: volume and DELTA VOL. are automatically stored and do not need to be stored in the PERSONAL menu. æ First carry out your menu settings. Â Next, select PERSONAL and press 5 Locking the set This function (only available on certain models) allows you to lock the set in order to limit its use completely or partially. Key lock æ Press , select TV LOCK ( ) and press . Â Set the LOCK to ON. The keys are locked. ê Switch off the set and put the remote control out of sight. The set cannot be used (it can only be switched on using the remote control). Programme lock æ Press , select TV LOCK ( ) and press . ê Enter your confidential access code. The first time, enter the code 0711 then confirm by re-entering 0711. The menu appears. or to to enter the number of the programme or socket you wish to lock. Ú Repeat stages ® and for each programme to be locked. You can lock 5 programmes separately. º Press to exit. To watch a programme which has been locked you will now need to enter the confidential code; otherwise the screen will remain blank. When a locked programme is displayed, use the P keys to access other programmes (the keys are used to enter the code). Caution: in the case of encrypted programmes which use an external decoder, it is necessary to lock the corresponding EXT socket (and not the programme number). ® Select PROGRAM NO. [. . . ] If your dealer cannot help, ask at a main Post Office for the booklet "How to Improve Television and Radio Reception". Mains connection Before connecting the TV to the mains, check that the mains supply voltage corresponds to the voltage printed on the type plate on the rear panel of the TV. If the mains voltage is different, consult your dealer. Important This apparatus is fitted with an approved moulded 13 Amp plug. To change a fuse in this type of plug proceed as follows: 1. [. . . ]