User manual PHILIPS 14PV415

[. . . ] Please take the time to read this operating manual before using your TV-Video combi. it contains important information and notes regarding operation. The TV-Video combi should not be turned on immediately after transportation from a cold to a hot area or vice versa, or in conditions of extreme humidity. Wait at least three hours after transporting the device. [. . . ] The decoder has now been allocated to this TV channel. tV channels are transmitted in certain pre-defined frequency ranges. a specific frequency/channel is assigned to each TV station. Certain frequency ranges are specified as special channels (hyperband channels). When a channel is found, it will stop searching. If this is the channel you want, press B 1 . If you set 'SKIP' on for a channel, this channel will be ignored when going through the channels with P+ or P­ . To search for other TV channels, begin again at step 4. I don't know the channels for my TV stations In this case, press K B L C in 'CHANNEL' to start the automatic channel search. a changing channel number will appear on the TV screen. Continue the automatic search until you have found the desired TV channel. You can receive channels from the satellite receiver via the scart socket AV1/EXT1 . To do this, select the channel number 'AV1' by pressing 0, 0, 1, with the keys 0. You will have to select the channel you want to receive on the satellite receiver itself. You can use this function to individually sort the TV channels already saved or to delete unwanted TV channels or those with poor reception. The clock resets automatically If you save a TV channel that transmits TXT/PDC on programme number `P01', date and time will and constantly be updated. During installation, all available TV channels are searched for and saved. If you want to replace the TV channels already saved with the new ones, follow the instructions below. This procedure may take several minutes. When the TV channel search is complete, 5. K B L C , select the saved TV channel that you want to move. Move the selected channel with K B L C to 6. [. . . ] Or, if you want to receive the weak signal, set BLUE BACKGROUND to 'OFF'. This function can be used to play a cassette over and over again. When the end of the cassette is reached, it will rewind and start from the beginning again. Select line 'VCR SET UP' using K B L C 2. [. . . ]